Blower Motor (Air Conditioner, Heater) - Install
Installation Procedure
- Position fan motor (15) . Install the washers, bolts (14) , and nuts (16) . Tighten bolts (14) to a torque of 12 ± 3 N·m (9 ± 2 lb ft). Tighten nuts (16) to a torque of 8 ± 3 N·m (6 ± 2 lb ft).
Show/hide table
Illustration 1 | g00284958 |
- Connect harness assembly (12) and wires (13) .
Show/hide table
Illustration 2 | g00284957 |
- Install cover (10) . Install the washers, the bolts and screws (11) .
Show/hide table
Illustration 3 | g00284956 |
- Install air filter (9A) (not shown). Install cover assembly (9) . Install control knobs (8) in order to secure the air filter.
Show/hide table
Illustration 4 | g00984412 |
- Install cover (7) .
Show/hide table
Illustration 5 | g00284954 |
- Install cover (5) , the washers, and bolts (6) .
Show/hide table
Illustration 6 | g00284953 |
- Install the insulation and rubber mat (4) on the cab floor.
Show/hide table
Illustration 7 | g00984410 |
Show/hide table
Illustration 8 | g00984409 |
- Position cover (2) , as shown. Connect harness assembly (3) .
- Position cover (2) and install screws (1) .
- Fill the cooling system. Refer to Operation and Maintenance Manual for the correct procedure.
End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
G3500B Engines Vibration Damper
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Speedometer
3034 Engine for Caterpillar Built Machines Crankshaft - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Install
2003/03/10 A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Serrated Connecting Rod
2003/03/24 A New Chain Tensioner is Now Used {5917}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Visual Inspection (Rear Axle and Final Drive)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Is Always Flashing
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Never Flashes
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Install
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors Throttle Position Sensor Circuit - Test
2003/03/10 New Track Links Improve the Service Life of the Track Chain {4170}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Design
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Ride Control Accumulator - Remove and Install
A Testing Procedure for the Automatic Burner Control{5700, 6642} A Testing Procedure for the Automatic Burner Control{5700, 6642}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)