Quick Coupler - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position quick coupler (8) on the machine. the weight of quick coupler (8) is approximately 204 kg (450 lb).
Show/hide table
 | |
| Illustration 1 | g00984494 |
- Install pin assembly (7) and bolt (6) .
Show/hide table
 | |
| Illustration 2 | g00984488 |
- Install pin assembly (4) and bolt (3) .
Show/hide table
 | |
| Illustration 3 | g00984484 |
- Connect hose assemblies (1) and (2) .
Show/hide table
 | |
| Illustration 4 | g00984482 |
- Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)" and Operation and Maintenance Manual, "Lubricant Viscosities".
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Never Flashes
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Is Always Flashing
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
G3500B Engines Vibration Damper
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Speedometer
3034 Engine for Caterpillar Built Machines Crankshaft - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Install
2003/03/10 A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors Throttle Position Sensor Circuit - Test
2003/03/10 New Track Links Improve the Service Life of the Track Chain {4170}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Design
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Ride Control Accumulator - Remove and Install
A Testing Procedure for the Automatic Burner Control{5700, 6642} A Testing Procedure for the Automatic Burner Control{5700, 6642}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
320B, 320B L and 320B N Excavators Cooling System Coolant Sample (Level 1) - Obtain
320B, 320B L and 320B N Excavators Cooling System Coolant Sample (Level 2) - Obtain
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Neutral Start Switch - Adjust
3044C Industrial Engine and Engines for Caterpillar Built Machines General Information
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Lines