Heater Coil - Install
Installation Procedure
- Install heater core (16) in the original position.
Show/hide table
Illustration 1 | g00460920 |
- Install the washers, bolts (18), and new seals (17) on both ends of the coil assembly.
- Connect hose assemblies (14). The torque for the hose clamps is 4.5 ± 0.5 N·m (40 ± 4 lb in).
Show/hide table
Illustration 2 | g00460919 |
- Install capillary tube (15) in coil assembly (13) between the second row and the third row. Insert the capillary tube to a depth of 230 ± 10 mm (9.1 ± 0.4 inch).
- Install gaskets (12) in the original positions.
Show/hide table
Illustration 3 | g00284959 |
- Install cover (10). Install the washers, the bolts, and screws (11) .
Show/hide table
Illustration 4 | g00284956 |
- Install air filter (9A). Install cover assembly (9). Install control knobs (8) in order to secure the air filter.
Show/hide table
Illustration 5 | g00984412 |
- Install cover (7) .
Show/hide table
Illustration 6 | g00284954 |
- Install cover (5). Install the washers and bolts (6) .
Show/hide table
Illustration 7 | g00284953 |
- Install the insulation and rubber mat (4) on the cab floor.
Show/hide table
Illustration 8 | g00984410 |
Show/hide table
Illustration 9 | g00984409 |
- Position cover (2), as shown. Connect wire (3) .
- Install cover (2) in the original position. Install screws (1) .
- Open valves (1A) .
Show/hide table
Illustration 10 | g00984408 |
- Fill the cooling system. Refer to Operation and Maintenance Manual for the correct procedure.
End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Caterpillar Information System:
2003/03/10 A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Serrated Connecting Rod
2003/03/24 A New Chain Tensioner is Now Used {5917}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Visual Inspection (Rear Axle and Final Drive)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pressure Reducing Valve (Traction Control System) - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Ripper Cylinder and Lines
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Rear Axle and Final Drive System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Selector and Pressure Control Valve (Pilot) - Remove and Install
Installation and Operation of the Belt Recoil Alarm for the Mobil-trac System{4197, 7400} Installation and Operation of the Belt Recoil Alarm for the Mobil-trac System{4197, 7400}
3034 Engine for Caterpillar Built Machines Crankshaft - Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Speedometer
G3500B Engines Vibration Damper
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Is Always Flashing
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Never Flashes
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Install
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors Throttle Position Sensor Circuit - Test
2003/03/10 New Track Links Improve the Service Life of the Track Chain {4170}