Pilot Operated Hydraulic Control (Joystick) - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position pilot control valve (8) and install nuts (7). Connect harness assemblies (9) and (10) .
Show/hide table
Illustration 1 | g00984390 |
- Connect six hose assemblies (6) .
Show/hide table
Illustration 2 | g00984388 |
- Position cover assembly (5) and install screws (4) .
Show/hide table
Illustration 3 | g00984387 |
- Position plate (3) and install screws (2) .
Show/hide table
Illustration 4 | g00984386 |
- Install screws (1) .
Show/hide table
Illustration 5 | g00984384 |
- Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)" and Operation and Maintenance Manual, "Lubricant Viscosities".
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Serrated Connecting Rod
2003/03/24 A New Chain Tensioner is Now Used {5917}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Visual Inspection (Rear Axle and Final Drive)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pressure Reducing Valve (Traction Control System) - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Ripper Cylinder and Lines
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Rear Axle and Final Drive System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Selector and Pressure Control Valve (Pilot) - Remove and Install
Installation and Operation of the Belt Recoil Alarm for the Mobil-trac System{4197, 7400} Installation and Operation of the Belt Recoil Alarm for the Mobil-trac System{4197, 7400}
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine Mount (Rear) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
2003/03/10 A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Heater Coil - Install
3034 Engine for Caterpillar Built Machines Crankshaft - Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Speedometer
G3500B Engines Vibration Damper
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Is Always Flashing
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Never Flashes
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Install