Engine Design
Show/hide table
Illustration 1 | g01357763 |
Cylinder and valve location (A) Inlet valve (B) Exhaust valve |
Bore ... 94 mm (3.70 inch)
Stroke ... 120 mm (4.72 inch)
Displacement ... 3.3 L (203 in3)
Cylinder arrangement ... In-line
Type of combustion
- Naturally aspirated engines ... Indirect injection
- Turbocharged engines ... Direct injection
Compression ratio
- Naturally aspirated engines ... 22:1
- Turbocharged engines ... 19:1
Number of cylinders ... 4
Valves per cylinder ... 2
Valve lash
- Inlet valve ... 0.25 mm (0.0098 inch)
- Exhaust valve ... 0.25 mm (0.0098 inch)
Firing order ... 1, 3, 4, 2
Fuel injection timing ... 5° BTC
When the crankshaft is viewed from the flywheel end of the engine, the crankshaft rotates in the following direction: ... Counterclockwise
When the camshaft is viewed from the flywheel end of the engine, the camshaft rotates in the following direction: ... Counterclockwise
Note: The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Install
2003/03/10 New Track Links Improve the Service Life of the Track Chain {4170}
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors Throttle Position Sensor Circuit - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Install
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Never Flashes
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Alert Indicator Is Always Flashing
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor (Front) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Quick Coupler - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
G3500B Engines Vibration Damper
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Speedometer
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Ride Control Accumulator - Remove and Install
A Testing Procedure for the Automatic Burner Control{5700, 6642} A Testing Procedure for the Automatic Burner Control{5700, 6642}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
320B, 320B L and 320B N Excavators Cooling System Coolant Sample (Level 1) - Obtain
320B, 320B L and 320B N Excavators Cooling System Coolant Sample (Level 2) - Obtain
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Neutral Start Switch - Adjust
3044C Industrial Engine and Engines for Caterpillar Built Machines General Information
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Lines
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft
2003/03/17 Improved Operation of the Power Train Oil Filter Bypass Indicator {1408, 1435}
2003/03/24 A Stronger Radiator Grill is Used {7170}