Radiator Group - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
- Install Tooling (A) and a suitable lifting device to the radiator group. The weight of the radiator group is approximately 95 kg (210 lb). Use the suitable lifting device to position the radiator group in the machine.
Show/hide table
Illustration 1 | g00940815 |
- Install bolts (13) in both sides of the radiator group.
Show/hide table
Illustration 2 | g00940816 |
- Connect hose (11) and fitting (12) .
Show/hide table
Illustration 3 | g00940813 |
- Remove Tooling (A) and install brackets (10) .
- Install bolts (9) .
Show/hide table
Illustration 4 | g00940812 |
- Install bolts (7) .
Show/hide table
Illustration 5 | g00940811 |
- Connect hose (8) .
- Connect hose assembly (6) .
Show/hide table
Illustration 6 | g00954938 |
- Position frame assembly (4). Install bolts (5) .
Show/hide table
Illustration 7 | g00954956 |
- Install bolts (3) to the other side of frame assembly (4) .
Show/hide table
Illustration 8 | g00954955 |
- Install grill assemblies (1) and (2) .
Show/hide table
Illustration 9 | g00940810 |
- Fill the hydraulic oil system. Refer to the Operation and Maintenance Manual for the machine that is being serviced.
- Fill the coolant system. Refer to the Operation and Maintenance Manual for the machine that is being being serviced.
End By:
- Install the side panels and the side doors. Refer to Disassembly and Assembly, "Hood Side Panels and Side Doors - Install".
- Install the hood. Refer to Disassembly and Assembly, "Hood - Install".
Caterpillar Information System:
773E Off-Highway Truck and 775E Off-Highway Truck Air System and Brakes Parking Brake Valve (Reset)
3054E Industrial Engine Front Cover - Remove and Install
R2900G Load Haul Dump Engine Oil and Filter - Change
R2900G Load Haul Dump Engine Oil Level - Check
R2900G Load Haul Dump Engine Mounts - Inspect
R2900G Load Haul Dump Engine Air Precleaner - Clean
R2900G Load Haul Dump Engine Air Filter Secondary Element - Replace
533 and 543 Wheel Feller Bunchers Engine Supplement Engine - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Monitor System Introduction
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Piston Pump (Auxiliary) - Remove
2004/02/09 New Handrails Improve the Restraint System {7255}
C15 and C18 Engines for Caterpillar Built Machines Crankshaft
2003/02/17 A New Rotator is Used on Harvester Heads {6326}
PM-465 Cold Planer Daily Inspection
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Monitor System Features
3054E Industrial Engine Glow Plugs - Remove and Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Oil Filter (Power Train)
2003/03/10 New Flash File Software Is Used for Product Link 151/201 {7620}
RM-350B Road Reclaimer/Soil Stabilizer Maintenance Interval Schedule
247, 257, 267, 277 and 287 Multi Terrain Loaders Lower Machine Frame - Clean
3054C Industrial Engine Fuel Injection Lines - Remove and Install
416D Backhoe Loader Tire Inflation - Check
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
C15 and C18 Petroleum Generator Sets Fuel Conservation Practices