Piston Pump (Auxiliary) - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| ZZ | 6V-9509 | Plug | 1 |
| 6V-9830 | Cap As | 1 | |
| 6V-9511 | Plug | 1 | |
| 6V-9832 | Cap As | 1 | |
| 6V-9513 | Plug | 1 | |
| 6V-9834 | Cap As | 1 | |
Start By:
- Remove the instrument console (front). Refer to Disassembly and Assembly, "Instrument Console (Front) - Remove and Install".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
- Remove three hose assemblies (2) from auxiliary pump (1) .
Show/hide table
 | |
| Illustration 1 | g00955456 |
- Attach a suitable lifting device and a lifting sling to auxiliary pump (1). Remove two bolts (3) and remove the auxiliary pump from the machine. The weight of the auxiliary pump is approximately 26 kg (58 lb).
Show/hide table
 | |
| Illustration 2 | g00955457 |
Caterpillar Information System:
2004/02/09 New Handrails Improve the Restraint System {7255}
C15 and C18 Engines for Caterpillar Built Machines Crankshaft
267, 277 and 287 Multi Terrain Loaders Machine Systems Worksheets - Troubleshoot - CNC1200-UP, CMP700-UP, and CNY1-UP
267, 277 and 287 Multi Terrain Loaders Machine Systems Hydrostatic System - Test and Adjust - CNC1200-UP, CMP700-UP, and CNY1-UP
267, 277 and 287 Multi Terrain Loaders Machine Systems Filling and Flushing the Hydraulic System - Test - CNC1200-UP, CMP700-UP, and CNY1-UP
2005/10/31 The Software for the Topcon System 5 Controller Contains an Additional Feature {1435, 7451}
TH220B, TH330B and TH340B Telehandlers Operation Information
769D and 773E Off-Highway Truck and 771D and 775E Quarry Trucks Prelubrication and High Speed Oil Change (QuickEvac) Toggle Switch (Service)
C15 Petroleum Generator Set Engines Water Pump
PM-465 Cold Planer Safety Messages
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Hydraulic Oil Lines (Boom) - Remove
2003/02/17 Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Monitor System Introduction
533 and 543 Wheel Feller Bunchers Engine Supplement Engine - Install
R2900G Load Haul Dump Engine Air Filter Secondary Element - Replace
R2900G Load Haul Dump Engine Air Precleaner - Clean
R2900G Load Haul Dump Engine Mounts - Inspect
R2900G Load Haul Dump Engine Oil Level - Check
R2900G Load Haul Dump Engine Oil and Filter - Change
3054E Industrial Engine Front Cover - Remove and Install
773E Off-Highway Truck and 775E Off-Highway Truck Air System and Brakes Parking Brake Valve (Reset)
533 and 543 Wheel Feller Bunchers Engine Supplement Radiator Group - Install
2003/02/17 A New Rotator is Used on Harvester Heads {6326}
PM-465 Cold Planer Daily Inspection