Oil Filter (Power Train)
Show/hide table
 | |
| Illustration 1 | g00955727 |
(1) Pressure switch
(2) Filter
Internal bypass pressure setting of the oil filter base ... 345 kPa (50 psi)
Caterpillar Information System:
3054E Industrial Engine Glow Plugs - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Monitor System Features
PM-465 Cold Planer Daily Inspection
2003/02/17 A New Rotator is Used on Harvester Heads {6326}
533 and 543 Wheel Feller Bunchers Engine Supplement Radiator Group - Install
773E Off-Highway Truck and 775E Off-Highway Truck Air System and Brakes Parking Brake Valve (Reset)
3054E Industrial Engine Front Cover - Remove and Install
R2900G Load Haul Dump Engine Oil and Filter - Change
R2900G Load Haul Dump Engine Oil Level - Check
R2900G Load Haul Dump Engine Mounts - Inspect
R2900G Load Haul Dump Engine Air Precleaner - Clean
R2900G Load Haul Dump Engine Air Filter Secondary Element - Replace
2003/03/10 New Flash File Software Is Used for Product Link 151/201 {7620}
RM-350B Road Reclaimer/Soil Stabilizer Maintenance Interval Schedule
247, 257, 267, 277 and 287 Multi Terrain Loaders Lower Machine Frame - Clean
3054C Industrial Engine Fuel Injection Lines - Remove and Install
416D Backhoe Loader Tire Inflation - Check
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
C15 and C18 Petroleum Generator Sets Fuel Conservation Practices
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Piston Pump (Auxiliary) - Install
416D Backhoe Loader Fuel Tank Water and Sediment - Drain
2003/02/24 Serviceable Parts for the 166-0294 Work Tool Harness As {1408, 7000}
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Piston Pump (Auxiliary) - Disassemble
3054C Industrial Engine Fuel Injection Nozzles - Remove