725 and 730 Articulated Trucks Caterpillar


Transmission Control

Usage:

725 AFX


Attēls 1g00949308

Transmisijai ir seši pārnesumi braukšanai uz priekšu, neitrālais pozīcija un viens atpakaļgaitas pārnesums.

Ātrumpārslēgam ir šādi trīs slēdži.

  • Augstā pārnesuma slēdzis (1)

  • Neitrālā stāvokļa bloķēšanas poga (2)

  • Transmisijas neitrālās pozīcijas slēdzis ( 3)

Transmisijas neitrālā pozīcija dod iespēju operatoram noturēt transmisiju pašlaik ieslēgtajā pārnesumā.

Neitrālā stāvokļa bloķēšanas poga novērš iespēju nejauši pārvietot ātrumpārslēgu. Lai būtu iespējams ātrumpārslēgu pārvietot no pozīcijas NEUTRAL (neitrāls), jānospiež neitrālās pozīcijas bloķēšanas poga. Neitrālās pozīcijas bloķēšanas poga novērš arī iespēju ātrumpārslēgu pārvietot pozīcijā NEUTRAL (neitrāls) no pozīcijas Drive (piedziņa) vai no pozīcijas REVERSE (atpakaļgaita).

Augstā pārnesuma slēdzis operatoram dod iespēju izvēlēties transmisijas augstā pārnesuma robežu.

Lai iegūtu informāciju par ekspluatāciju, skatiet Ekspluatācijas un apkopes rokasgrāmatu , "Informācija par ekspluatāciju".

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines E033 Loss of Coolant Flow Derate
120H and 135H Motor Graders Hydraulic and Steering System Shuttle Valve
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove and Install
8B and 10B Pavemaster Screed Crown Control
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Drum Is Always Offset Full Right
8B and 10B Pavemaster Screed Thickness Control Screw Adjustment
550B, 560B, 570B and 580B Wheel Harvesters Cab Tilting
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Torque Converter
550B, 560B, 570B and 580B Wheel Harvesters Bottom Guard Lowering
TH350B, TH355B, TH360B and TH460B Telehandlers Boom Cylinder Pin - Lubricate
AP-655C and BG-2255C Asphalt Pavers Machine Systems Auxiliary System
C15 and C18 Engines for Caterpillar Built Machines Fuel Level Sensor Circuit - Test
735 Articulated Truck Transmission Control
740 Articulated Truck Transmission Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Right Side) - Remove and Install
2003/01/27 Correction to Testing and Adjusting , "Service Braking System Pressure - Test" {4250}
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Tire and Rim - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Swing Drive
3054E Industrial Engine Camshaft - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Charge Filter
C11 and C13 Engines Piston Cooling Jet
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Water Separator, Primary Fuel Filter, and Fuel Priming Pump - Remove and Install - Engine in Chassis
550B, 560B, 570B and 580B Wheel Harvesters Hood Tilting
AP-655C and BG-2255C Asphalt Pavers Machine Systems Introduction
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.