Piston Cooling Jet
Show/hide table
 | |
| 图 1 | g02803197 |
必须检查活塞冷却喷嘴 (5) 机油流的位置。 插入一根直钻杆，钻杆的直径刚好适合各个活塞喷嘴节流孔。 活塞喷嘴节流孔的内径 (3) 为 2.4 mm (0.09449 in)。 活塞喷嘴节流孔的内径 (4) 为 1.5 mm (0.05906 in)。 钻杆模拟正常工作压力下的机油流。 将钻杆置于节流孔 (4) 中。 钻杆必须在位置 (2D) 处穿过一个圆圈，圆圈直径为 15 mm (0.59055 in)。 将钻杆置于节流孔 (3) 中。 钻杆必须在位置 (1D) 处穿过一个圆圈，圆圈直径为 9 mm (0.35433 in)。
注: 切勿让钻杆损坏活塞喷嘴节流孔的内侧表面。 内侧表面的损坏可能会改变机油流。
使用以下尺寸定位点 (1) 和点 (2) 。
- 尺寸 (A) ... 47.1 ± 0.5 mm (1.85433 ± 0.01969 in)
- 尺寸 (B) ... 55.30 ± 0.25 mm (2.177 ± 0.010 in)
- 尺寸 (C) ... 3.84 ± 0.5 mm (0.15118 ± 0.01969 in)
- 尺寸 (D) ... 250.00 ± 0.25 mm (9.842 ± 0.010 in)
- 尺寸 (E) ... 4.5 mm (0.17717 in)
- 尺寸 (B) ... 55.30 ± 0.25 mm (2.177 ± 0.010 in)
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Charge Filter
3054E Industrial Engine Camshaft - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Swing Drive
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Tire and Rim - Remove and Install
2003/01/27 Correction to Testing and Adjusting , "Service Braking System Pressure - Test" {4250}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Right Side) - Remove and Install
740 Articulated Truck Transmission Control
735 Articulated Truck Transmission Control
725 and 730 Articulated Trucks Transmission Control
C15 and C18 Engines for Caterpillar Built Machines E033 Loss of Coolant Flow Derate
120H and 135H Motor Graders Hydraulic and Steering System Shuttle Valve
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove and Install
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Water Separator, Primary Fuel Filter, and Fuel Priming Pump - Remove and Install - Engine in Chassis
550B, 560B, 570B and 580B Wheel Harvesters Hood Tilting
AP-655C and BG-2255C Asphalt Pavers Machine Systems Introduction
AP-1055B and BG-2455C Asphalt Pavers Lubricant Viscosities
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Summary of Revisions
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Forward Propel
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Reverse Propel
3054E Industrial Engine Crankshaft Rear Seal - Install
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
TH350B, TH355B, TH360B and TH460B Telehandlers Monitoring System
C15 and C18 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
725 and 730 Articulated Trucks Lowering the Body with Engine Stopped