Crown Control
The crown control (2) adjusts the screed in order to produce the contour that is desired of the finished pavement. Your screed may be configured with a manual control, a power control, or both types of adjustment controls.
Note: The screed does not require a leading edge crown.
Manual Control (if equipped)
Show/hide table
 | |
| Illustration 1 | g00684495 |
To increase the crown by using the manual control, turn the control lever in the clockwise direction. To decrease the crown, turn the control lever in the counterclockwise direction. Engage lever locking device (1) in order to keep the setting from drifting while you pave.
Power Crown Control (if equipped)
Show/hide table
 | |
| Illustration 2 | g00803301 |
The power crown control (3) is located in the right screed control box. Move the switch upward in order to increase the crown. Move the switch downward in order to decrease the crown.
Caterpillar Information System:
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Drum Is Always Offset Full Right
8B and 10B Pavemaster Screed Thickness Control Screw Adjustment
550B, 560B, 570B and 580B Wheel Harvesters Cab Tilting
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Torque Converter
550B, 560B, 570B and 580B Wheel Harvesters Bottom Guard Lowering
TH350B, TH355B, TH360B and TH460B Telehandlers Boom Cylinder Pin - Lubricate
AP-655C and BG-2255C Asphalt Pavers Machine Systems Auxiliary System
C15 and C18 Engines for Caterpillar Built Machines Fuel Level Sensor Circuit - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission Pump
TH220B, TH330B and TH340B Telehandlers Additional Messages
8B and 10B Pavemaster Screed Adjustments While Paving
2003/01/27 Correction to Operation and Maintenance Manual , "Transmission Oil Filter - Replace" {3004, 3067}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Shuttle Valve
C15 and C18 Engines for Caterpillar Built Machines E033 Loss of Coolant Flow Derate
725 and 730 Articulated Trucks Transmission Control
735 Articulated Truck Transmission Control
740 Articulated Truck Transmission Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Right Side) - Remove and Install
2003/01/27 Correction to Testing and Adjusting , "Service Braking System Pressure - Test" {4250}
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Tire and Rim - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Swing Drive
3054E Industrial Engine Camshaft - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Charge Filter