Transmission Pump
Show/hide table
 | |
| Illustration 1 | g00951617 |
The gear pump for the transmission (1) is a positive displacement type pump. The one-section gear pump is bolted to the transmission cover. The implement pump and the steering pumps are mounted on the gear pump and driven by the gear pump for the transmission.
A pump drive gear that is fastened to the torque converter impeller drives gear (2). Gear (2) is fastened to splined shaft (3) which drives the pump.
Caterpillar Information System:
TH220B, TH330B and TH340B Telehandlers Additional Messages
8B and 10B Pavemaster Screed Adjustments While Paving
2003/01/27 Correction to Operation and Maintenance Manual , "Transmission Oil Filter - Replace" {3004, 3067}
3054E Industrial Engine Cylinder Head - Install
C15 and C18 Petroleum Generator Sets Engine - Clean
2003/01/27 Correction to Disassembly & Assembly , "Cab" {7300, 7301, 7325, 7335}
2003/02/03 Correction to Operation and Maintenance Manual , "Air Inlet Heater Starting Aid - If Equipped" {1090}
2003/02/24 Installation of the Correct Dust Seal in the Swing Gear and Bearing {7063}
Field Installation of the 223-8417 Installation Arrangement (Air Conditioner Conversion) {7304, 7320} Field Installation of the 223-8417 Installation Arrangement (Air Conditioner Conversion) {7304, 7320}
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Diagnostic Capabilities
3054E Industrial Engine Cylinder Head - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Connector Locations
C15 and C18 Engines for Caterpillar Built Machines Fuel Level Sensor Circuit - Test
AP-655C and BG-2255C Asphalt Pavers Machine Systems Auxiliary System
TH350B, TH355B, TH360B and TH460B Telehandlers Boom Cylinder Pin - Lubricate
550B, 560B, 570B and 580B Wheel Harvesters Bottom Guard Lowering
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Torque Converter
550B, 560B, 570B and 580B Wheel Harvesters Cab Tilting
8B and 10B Pavemaster Screed Thickness Control Screw Adjustment
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Drum Is Always Offset Full Right
8B and 10B Pavemaster Screed Crown Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Shuttle Valve
C15 and C18 Engines for Caterpillar Built Machines E033 Loss of Coolant Flow Derate