Illustration 1 | g00946490 |
Engine Coolant Temperature (1) - Indicates the temperature of the engine coolant. The normal operating range is the white range. The gauge needle will indicate in the red range if the engine coolant temperature exceeds 103 °C (217 °F). |
Transmission Oil Temperature (2) - Indicates the temperature of the torque converter/transmission oil. The normal operating range is the white range. The gauge needle will indicate in the red range if the transmission oil temperature exceeds 129 °C (264 °F). |
Hydraulic Oil Temperature (3) - Indicates the temperature of the hydraulic oil. The normal operating range is the white range. The gauge needle will indicate in the red range if the hydraulic oil temperature exceeds 104 °C (219 °F). |
Fuel Level (4) - Indicates the amount of fuel remaining in the fuel tank. |
Tachometer (5) - The tachometer displays the engine speed during machine operation.
Speedometer (6) - The speedometer consists of three digits. The speedometer shows the ground speed of the machine in kilometers per hour or miles per hour.
Actual Gear Indicator (7) - The actual gear indicator consists of two digits. The two digits indicate the actual transmission gear that is engaged. The left digit is the actual gear. The right digit shows the direction that was selected.
Illustration 2 | g00946492 |
Illustration 3 | g00937414 |
Front brake oil pressure |
Front Brake Oil Pressure Gauge (8) (If Equipped) - Shows the hydraulic pressure in the front braking circuit when the service brakes are fully applied. The front brake oil pressure should be 4135 ± 345 kPa (600 ± 50 psi).
Illustration 4 | g00937415 |
Rear brake oil pressure |
Rear Brake Oil Pressure Gauge (9) (If Equipped) - Shows the hydraulic pressure in the rear braking circuit when the service brakes are fully applied. The rear brake oil pressure should be 4135 ± 345 kPa (600 ± 50 psi).
NOTICE |
---|
Loss of brake oil pressure may decrease the brake application force. Also, loss of brake oil pressure may cause the parking brake to engage. If low brake oil pressure is indicated, stop the machine immediately. Inspect the system for the cause of low brake oil pressure. Repair the brake system before returning the machine to operation. |
Illustration 5 | g00946493 |
Display Window (11) - Indicates various machine system conditions on a six digit display. The display window provides a digital readout that can show total operating hours of the engine (hourmeter), current engine speed (tachometer), total travel distance (odometer), or logged and active diagnostic codes. Also, the gauges in the gauge display may be monitored digitally in the display window.
Press operator mode scroll switch (10) on the right side of the dash panel until the desired information is selected. The proper unit of measurement (°C, kPa, miles, km, rpm, liters, or service code) will be indicated at the top of the display window.
Reference: For further information on the operator mode scroll switch and the display windows, refer to the Operation and Maintenance Manual, "Operator Mode Scroll Switch" for the machine that is being serviced.