R1600G Load Haul Dump Caterpillar


Parking (Remote Control)

Usage:

R1600G 9PP



Ilustrasi 1g00901851

  • Lepas tuas kontrol gerakan (1) atau gerakkan tuas kontrol gerakan (1) ke posisi tengah. Saat tuas kontrol gerakan di posisi tengah, rem akan terpasang. Lampu kuning pada ruang operator akan menyala.

    1. Pasang rem parkir dengan menekan sakelar rem parkir (4) hingga ke posisi ON.

    1. Jika bucket kosong, turunkan bucket hingga ke permukaan tanah.

    1. Jika bucket terisi, miringkan bucket ke belakang secara penuh dan turunkan ke posisi bawa, kira-kira 400 mm (15 in) dari atas permukaan tanah.


      PERHATIAN

      Mematikan engine dengan segera setelah bekerja dengan beban dapat mengakibatkan panas yang berlebihan serta keausan yang lebih cepat pada komponen-komponen engine.

      Apabila engine telah dioperasikan pada rpm yang tinggi dan/atau beban yang besar, jalankan engine pada kecepatan terendah selama sedikitnya tiga menit untuk mengurangi dan menstabilkan temperatur internal engine sebelum mematikan engine.

      Menghindari pemberhentian engine sewaktu masih panas akan memaksimalkan umur pemakaian poros turbocharger dan bantalan.


    1. Tekan sakelar stop engine (3) hingga engine mati.

    1. Tekan pada sakelar pemberhentian jauh (2) untuk menonaktifkan unit pengirim. Alat berat sekarang dapat dinaiki.



      Ilustrasi 2g00942849

    1. Tekan separuh bawah sakelar pengendali jauh (5) untuk menonaktifkan sistem pengendali jauh. Alat berat sekarang dapat dioperasikan secara manual.


    PERHATIAN

    Jika alat berat tidak akan dioperasikan dengan alat kontrol jauh untuk jangka waktu yang lama, lepaskan penerima sinyal dari alat berat tersebut dan simpanlah di tempat yang kering dan aman. Hal ini akan mencegah kerusakan yang tidak disengaja pada alat penerima sinyal tersebut.


  • Caterpillar Information System:

    IQAN® Monitoring ; Control System IQAN-MDM
    Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
    R1600G Load Haul Dump Operation (Remote Control)
    247, 257, 267, 277 and 287 Multi Terrain Loaders Alternate Exit
    574B Forwarder Hood Tilting
    Premier Grade and Slope Control System Sonic Sensor
    R1600G Load Haul Dump Before Operation (Remote Control)
    IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0262 - FMI 03
    IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 03
    773E Off-Highway Truck Engine Oil and Filter - Change
    R1600G Load Haul Dump Stopping the Engine if an Electrical Malfunction Occurs
    R1600G Load Haul Dump Stopping the Machine
    IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 04
    R1600G Load Haul Dump Lifting and Tying Down the Machine
    574B Forwarder Bottom Guard Lowering
    574B Forwarder Cab Tilting
    IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0262 - FMI 04
    IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 1834 - FMI 04
    2002/12/23 New Liquid Level Switch Extends Service Life {7422}
    R1600G Load Haul Dump Towing the Machine
    R2900G Load Haul Dump Gauges
    R2900G Load Haul Dump Operator Mode Scroll Switch
    R1300G Load Haul Dump Braking System Service and Parking Brake
    2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Circuit (If Equipped)" {5077}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.