Lifting and Tying Down the Machine
Show/hide table
| 注意 |
|---|
起吊或系紧不当，会使载荷转移而伤及人员或机器。 起吊前，先安装转向架锁。 |
Show/hide table
 | |
| 图 1 | g00942862 |
Show/hide table
| 在机器上通过这个图标标记正确的起吊点。 |
Show/hide table
| 在机器上通过这个图标标记正确的系紧点。 |
参考机器的尺寸，请参阅操作和保养手册, "机器外形和技术规格"。
使用正确的额定钢绳和正确额定吊索提升机器。 把吊车定位，以便在平地上起吊机器。
伸展杆宽度必须足够，以防与机器接触。
在几个位置处安装系紧绳。 轮子前后都塞上垫块。
遵守有关法规，限制负载尺寸（重量，宽度和长度）。
关于您的机器的装运说明，请咨询卡特彼勒代理商。
Caterpillar Information System:
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 04
R1600G Load Haul Dump Parking (Remote Control)
IQAN® Monitoring ; Control System IQAN-MDM
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
R1600G Load Haul Dump Operation (Remote Control)
247, 257, 267, 277 and 287 Multi Terrain Loaders Alternate Exit
574B Forwarder Hood Tilting
Premier Grade and Slope Control System Sonic Sensor
R1600G Load Haul Dump Before Operation (Remote Control)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0262 - FMI 03
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0041 - FMI 03
773E Off-Highway Truck Engine Oil and Filter - Change
574B Forwarder Bottom Guard Lowering
574B Forwarder Cab Tilting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0262 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 1834 - FMI 04
2002/12/23 New Liquid Level Switch Extends Service Life {7422}
R1600G Load Haul Dump Towing the Machine
R2900G Load Haul Dump Gauges
R2900G Load Haul Dump Operator Mode Scroll Switch
R1300G Load Haul Dump Braking System Service and Parking Brake
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Circuit (If Equipped)" {5077}
R2900G Load Haul Dump Engine and Machine Warm-Up
R2900G Load Haul Dump Bucket Rated Load