Use 4C-9416 Wrench Assembly To Remove Asphalt Screed Mounting Nuts{6640,0602}
Usage:
AP-800C, AP-1000, AP-1050 Asphalt Pavers
Reference: KENR2527; Service Manual; Disassembly and Assembly
Warranty: G
Features/Benefits
-
- * Used to quickly and easily remove and install both 2H-3778 Spanner Nuts, the lock nuts for Extend-A-Mat® B Screed extender sloper pivot pins (assembly requires an inner spanner nut, star washer and outer spanner locknut)
- * Used with 3/4inch Square Drive Torque Wrench (torque specification for two nuts is 545 ± 25 N·m [400 ± 20 lb ft])
- * Due to its location, nut is extremely difficult to access using any other tooling
- * Wrench uses an inner pilot to prevent it from slipping off during removal and installation of inner spanner nut (makes removal and installation much easier)
- * Pilot also keeps wrench teeth engaged in spanner nut when removing and installing outer locknut (helps prevent slippage, resulting in damage to nut or injury to mechanic)
- * Wrench is heat treated for improved durability
- * Used to quickly and easily remove and install both 2H-3778 Spanner Nuts, the lock nuts for Extend-A-Mat® B Screed extender sloper pivot pins (assembly requires an inner spanner nut, star washer and outer spanner locknut)
Specifications/Technical Information
Overall length - 76.2 mm (3.00 inch)
Spanner teeth - four, equally spaced
Tooth width - 6.0 mm (.24 inch)
Square drive - 3/4inch
Approximate weight - 2 kg (5 lbs)
4C-9416 Wrench Assembly
Caterpillar Information System:
1996/12/09 Thicker 1U-9646 Pusher And 1U-9647 Pusher Make XT-3 Hose Assembly Easier{0684}
1996/12/09 Tooling Plates Simplify Swashplate Neutral Adjustment On Sauer Sunstrand Hydraulic Pumps; 4C-8498 Plate (42 CC Pumps - Drum Propel), 4C-9419 Plate (55 CC Pumps - Axle Propel), 127-5653 Plate, Neutral (75 CC Pumps), 127-5654 Plate, Neutral (100 CC Pum
1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}
1996/12/09 Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/02 New Housings Are Available In Regulator Housing Groups {1393}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 New Assembly Procedure For Rotate Carriage Groups {6408,6405,6460}
1996/12/02 New Drive Train Lubrication Updates {3251,3252,3253,7568,7581}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 New Front Park, Turn Lamp Is Available That Is Not Affected By Vibration {1430}
1996/12/02 Overfill Of Hydraulic Tank May Cause Oil Leakage {7479,1460}
1996/12/09 Electronic Control Training Aid{0713}
1996/12/09 124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}
1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/16 New Procedure To Calibrate Tensioner Warning Switch {4197}
1996/12/16 Fire Extinguisher Bracket Now Used {7254,7419}
1996/12/16 Spring Force Increased On Freewheel Valve Spool In Control Valve Group For Front Wheel Drive System {4352}
1996/12/16 Retarder Lamp Now Used As Brake Lamp On Some Off-Highway Trucks {3120,3121,4280,4250}
1996/12/16 Higher Viscosity Oil Should Be Used In Certain Final Drives And Differentials {4070,0645}
1996/12/16 New Shaft Assembly Used In The Steering Gear Groups To Improve Service Life {4301,4300}
1996/12/16 Serial Number Prefix Changes On Torque Converters {3101}