Remove Fuel From Electronic Control Module (ECM) Before Shipping {1705}
Usage:
3406B (PEEC) And 3176 Truck Engines
Before shipping, be sure to drain all fuel from ECM's that are removed from the 3406B (PEEC) and 3176 Truck Engines. The presence of fuel in the ECM cooling manifold could cause unnecessary hazards during shipping and handling.
Caterpillar Information System:
1988/12/26 New Screw Used In BrakeSaver Water Lines Group {1155}
1988/12/26 Check Load Height Before Transporting Machines {7500}
1988/12/19 Do Not Use Heli-Coils® To Repair Rocker Arm Assemblies On 5.4" Bore Engines {1123}
1988/12/19 New Piston Body Assemblies Used {1214}
1988/12/19 Correct Timing Specification {0374}
1988/12/19 Larger Valve Springs Must Be Used With Williams Blue Ox® 485 kPa (70 psi) Exhaust Brake; New Spring Compressor Group Available {1108,1109,1119,0702,0703}
1988/12/19 Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19 New Camshafts Used; Camshaft Installation Kits Available {1209,1210}
1988/12/19 New Material Used For Rotating Seal Rings In Some Power Shift Transmissions, Steering Clutches And Torque Converters {3101,3150,4100}
1988/12/12 Valve Kit Available For Explosion Relief Valve{1201,1233}
1988/12/12 Oil Cooler Bypass Elbow Changed To Prevent Bypass Valve Seizure{1314,1318}
1988/12/12 New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1979/01/08 Prevention Of Fires On Hydraulic Excavators{7000,5057}
1979/01/08 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed{7462}
1979/01/08 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08 New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08 Improved Woodward Governor Groups{1264,1289}
1979/01/15 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15 Removal And Installation Of Taper Type Bearings{0622,1214,1219}
1979/01/15 6V83 Emery Polishing Paper{0675}
1979/01/22 Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22 New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22 Ether Starting Aid Groups Are Now Available{1456}
1979/01/29 Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}