1988/12/19 Caterpillar


Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}

Usage:


3300 Family Of Engines With Scroll Fuel Systems

When replacing the 8N2501 Governor Housing Assembly in the 3300 Family of Engine with Scroll Fuel Systems, it is possible to have an interference between components within the governor or the rack may not move all the way to the "Fuel Off" position. These condition may exist because of casting shifts during the manufacturing process of the governor housing.

To ensure that the governor will function properly, it is necessary to check the assembled dimension for rack lever travel. Special Instruction, SEHS9026, "Check Assembled Dimension for Rack Lever Travel," provides the correct procedure for this check.

Caterpillar Information System:

1988/12/19 New Camshafts Used; Camshaft Installation Kits Available {1209,1210}
1988/12/19 New Material Used For Rotating Seal Rings In Some Power Shift Transmissions, Steering Clutches And Torque Converters {3101,3150,4100}
1988/12/12 Valve Kit Available For Explosion Relief Valve{1201,1233}
1988/12/12 Oil Cooler Bypass Elbow Changed To Prevent Bypass Valve Seizure{1314,1318}
1988/12/12 New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12 Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12 New Mounting Bolts Used In Aftercooler Housings{1063,1058}
1988/12/12 Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/05 Improved Air Conditioner Thermostat Switches Have Tin-Plated Internal Parts{7320}
1988/11/28 Bleed Holes Now In Paddle In Air Inlet Shutoff Groups {1078}
1988/11/28 Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28 More Charts And Decals Available For Lubrication And Maintenance Intervals {0374,0375,7500}
1988/12/19 Larger Valve Springs Must Be Used With Williams Blue Ox® 485 kPa (70 psi) Exhaust Brake; New Spring Compressor Group Available {1108,1109,1119,0702,0703}
1988/12/19 Correct Timing Specification {0374}
1988/12/19 New Piston Body Assemblies Used {1214}
1988/12/19 Do Not Use Heli-Coils® To Repair Rocker Arm Assemblies On 5.4" Bore Engines {1123}
1988/12/26 Check Load Height Before Transporting Machines {7500}
1988/12/26 New Screw Used In BrakeSaver Water Lines Group {1155}
1988/12/26 Remove Fuel From Electronic Control Module (ECM) Before Shipping {1705}
1979/01/08 Prevention Of Fires On Hydraulic Excavators{7000,5057}
1979/01/08 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed{7462}
1979/01/08 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08 New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08 Improved Woodward Governor Groups{1264,1289}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.