PRODUCT SUPPORT PROGRAM FOR CALIBRATING THE OIL LEVEL GAUGE (DIPSTICK) ON CERTAIN C32 MARINE ENGINES INSTALLED IN HATTERAS YACHTS
Usage:
REBE2305-00
Show/hide table
| 08Aug2007 |
D180
D183
D183
Show/hide table
| Before/After (Limited distribution) | PRODUCT SUPPORT PROGRAM FOR CALIBRATING THE OIL LEVEL GAUGE (DIPSTICK) ON CERTAIN C32 MARINE ENGINES INSTALLED IN HATTERAS YACHTS |
|
| 1326 | PS42484 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42484" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Aug2009 |
PROBLEM
Show/hide table
| The engine oil level gauge calibration charts, which are based on the installation angle of the engine, can cause an overfilled crankcase on certain C32 Marine Engines. If the calibration charts are used to calibrate the oil level gauge it can lead to low power and/or engine vibration. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C32 | RNC02242, 2374, 2395, 2404, 2414, 2427, 2433, 2438, 2525, 2534, 2579, 2583-2586, 2588, 2599, 2614-2617, 2622, 2625, 2628, 2630, 2635, 2637, 2697, 2702, 2704-2709, 2711-2712, 2715-2719, 2723-2725, 2727-2730, 2732, 2783-2784, 2796-2797, 2800, 2822, 2825-2826 RXB02804-02805, 2809, 2811, 2824-2825, 2827-2828, 2863, 2865-2867, 2907-2908, 2918-2919, 2931-2932, 2941, 2944, 2962-2963, 2986-2987, 2990, 2992-2996, 3039-3040, 3059-3060, 3070-3073, 3075, 3078, 3089-3090, 3138-3139, 3175-3178, 3228, 3243-3246, 3250, 3279 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Refer to the engines Operation and Maintenance Manual Engine Oil Level Gauge Calibration Procedure for the proper procedure. SEBU7908 is for engines with the RXB1-UP serial number prefix. The Operation and Maintenance Manual, SEBU7822 is for engines with the RNC1-UP serial number prefix. Engine News SEBD9445 also contains the proper calibration procedure. This procedure should be performed at the next scheduled oil change interval. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 2.5-hour job | ||||||
| Reasonable travel and mileage is covered. Please note the sister engine serial number installed in the boat in the claim story as only one trip will be covered for a pair of engines in a boat. |
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE FUEL INJECTION PUMPS ON CERTAIN C7 ON-HIGHWAY TRUCK ENGINES INSTALLED IN BLUEBIRD CHASSIS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE FUEL INJECTION PUMPS ON CERTAIN C7 ON-HIGHWAY TRUCK ENGINES INSTALLED IN BLUEBIRD CHASSIS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING INTERNAL INJECTOR HARNESS TRAYS ON 2007 C9 ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING INTERNAL INJECTOR HARNESS TRAYS ON 2007 C9 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER OIL LINES ON TWIN TURBOCHARGER EQUIPPED G3516C, G3516E, G3520C, AND G3520E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER OIL LINES ON TWIN TURBOCHARGER EQUIPPED G3516C, G3516E, G3520C, AND G3520E ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE POSITION OF TERMINAL CONNECTION LEADS INSIDE THE GENERATOR BOX ON CERTAIN C18 XQ600 PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE POSITION OF TERMINAL CONNECTION LEADS INSIDE THE GENERATOR BOX ON CERTAIN C18 XQ600
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING XQ MODULES PRODUCT SUPPORT PROGRAM FOR REWORKING XQ MODULES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR ADDING VIBRATION DAMPERS TO AUTOMATIC AIR SHUT OFFS ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, AND 3516B HD ENGINES PRODUCT IMPROVEMENT PROGRAM FOR ADDING VIBRATION DAMPERS TO AUTOMATIC AIR SHUT OFFS ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, AND 3516B HD ENGINES
PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING 0R0805 AND 0R0807 WATER PUMPS IN DEALER PARTS STOCK PRODUCT SUPPORT PROGRAM FOR REWORKING 0R0805 AND 0R0807 WATER PUMPS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CYLINDER PACKS AND EXHAUST COMPONENTS ON CERTAIN 3456 GENSETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CYLINDER PACKS AND EXHAUST COMPONENTS ON CERTAIN 3456 GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DEFECTIVE RFI FILTERS ON CERTAIN 3406C, 3408C, 3412C MARINE AUXILIARY GENSETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DEFECTIVE RFI FILTERS ON CERTAIN 3406C, 3408C, 3412C MARINE AUXILIARY GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5304 AND 292-5307) PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5304 AND 292-5307)
PRODUCT SUPPORT PROGRAM FOR INSTALLING SWITCH ASSEMBLY TO PROVIDE FUEL PRIMING CAPABILITY TO XQ30 - XQ100 GENSETS PRODUCT SUPPORT PROGRAM FOR INSTALLING SWITCH ASSEMBLY TO PROVIDE FUEL PRIMING CAPABILITY TO XQ30 - XQ100 GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL RETURN HOSES ON CERTAIN C27 AND C32 EPG ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL RETURN HOSES ON CERTAIN C27 AND C32 EPG ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR COMPRESSOR HEAD GASKET KIT ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR COMPRESSOR HEAD GASKET KIT ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE FUEL INJECTION PUMPS ON CERTAIN C7 AND C9 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE FUEL INJECTION PUMPS ON CERTAIN C7 AND C9 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
INTERIM PRODUCT SUPPORT PROGRAM FOR REWORKING OIL FILL TUBES ON CERTAIN 2007 C7/C9 ON-HIGHWAY TRUCK ENGINES INTERIM PRODUCT SUPPORT PROGRAM FOR REWORKING OIL FILL TUBES ON CERTAIN 2007 C7/C9 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP INLET ELBOW ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP INLET ELBOW ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES