PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES
Usage:
REBE2269-01
Show/hide table
| 20Sep2007 |
| (Revised 09Oct2007) |
U-465
A-380
TT-32
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES |
|
| 7555 1100 | PI31352 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31352" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31352" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
| NOTE: | This Revised Service Letter replaces the 20Sep2007 Service Letter. Changes have been made to the Service Claims Allowance, Parts Needed, and Action Required. |
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 31Mar2008 | 30Sep2008 |
PROBLEM
Show/hide table
| The injector sleeve o-rings need to be replaced on certain C9 MTB On-Highway truck engines. The existing o-rings can fail and cause fuel to enter the coolant system. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C9 | MTB00101-00106, 109-190, 197-199, 1000-1001, 1003-1005, 1007-1221, 1227-1387, 1396-1429, 1431-1464, 1467-1550, 1553-2020 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 6 | 1093207 | SEAL-O-RING |
| 12 | 1482903 | SEAL-O-RING |
| 6 | 1495240 | RING-BACKUP |
| 6 | 2271200 | SLEEVE-INJECTOR |
| 6 | 2930730 | RING-BACKUP |
| 6 | 3107255 | SEAL-O-RING |
| 6 | 3107257 | SEAL-O-RING |
ACTION REQUIRED
Show/hide table
| Follow Special Instruction REHS3798 for proper installation of injector sleeve o-rings. NOTE: Injector o-rings need to be replaced when the injector is removed to perform sleeve o-ring replacement. Reference SEBD6792 for correct orientation of injector o-rings. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 9.6-hour job | |||||
| *Dealer to perform most economical repair* Description_____________SMCS Code_________Hours Wash____________________1290-074__________0.3 R&I Injectors___________1290-010-S________4.2 Remove Sleeve___________1713-011__________1.3 Clean Sleeve Bore_______1713-70-BO________0.8 Install sleeve seals____1713-012-SA_______0.8 Install Sleeve set______1713-012-S________1.7 Test After______________1290-030__________0.5 *Exception may be considered and claimed depending on chassis type* |
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES MODELS INVOLVED - C9 Mass Transit Bus Engines Dear Caterpillar Product Owner: The injector sleeve o-rings need to be replaced on certain C9 MTB On-Highway truck engines. The existing o-rings can cause fuel to enter the coolant system if failure occurs. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 20Sep2007 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 20Sep2007 Service Letter |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORKING XQ MODULES PRODUCT SUPPORT PROGRAM FOR REWORKING XQ MODULES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR ADDING VIBRATION DAMPERS TO AUTOMATIC AIR SHUT OFFS ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, AND 3516B HD ENGINES PRODUCT IMPROVEMENT PROGRAM FOR ADDING VIBRATION DAMPERS TO AUTOMATIC AIR SHUT OFFS ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, AND 3516B HD ENGINES
PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 2M-9780 O-RING ON CERTAIN COMMON DESIGN GENSET PACKAGES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 2M-9780 O-RING ON CERTAIN COMMON DESIGN GENSET PACKAGES
PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL TANK LABELS ON CERTAIN PM1000 UNITS PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL TANK LABELS ON CERTAIN PM1000 UNITS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5307 AND 292-5304) PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5307 AND 292-5304)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON RAW WATER COOLED C9 MARINE GENERATOR ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON RAW WATER COOLED C9 MARINE GENERATOR ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTER BASE ON CERTAIN 3456 GENSETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTER BASE ON CERTAIN 3456 GENSETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LINE SUPPORT BRACKETS AND HARDWARE ON CERTAIN 3516BHD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LINE SUPPORT BRACKETS AND HARDWARE ON CERTAIN 3516BHD LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE POSITION OF TERMINAL CONNECTION LEADS INSIDE THE GENERATOR BOX ON CERTAIN C18 XQ600 PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE POSITION OF TERMINAL CONNECTION LEADS INSIDE THE GENERATOR BOX ON CERTAIN C18 XQ600
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER OIL LINES ON TWIN TURBOCHARGER EQUIPPED G3516C, G3516E, G3520C, AND G3520E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER OIL LINES ON TWIN TURBOCHARGER EQUIPPED G3516C, G3516E, G3520C, AND G3520E ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING INTERNAL INJECTOR HARNESS TRAYS ON 2007 C9 ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING INTERNAL INJECTOR HARNESS TRAYS ON 2007 C9 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE FUEL INJECTION PUMPS ON CERTAIN C7 ON-HIGHWAY TRUCK ENGINES INSTALLED IN BLUEBIRD CHASSIS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE FUEL INJECTION PUMPS ON CERTAIN C7 ON-HIGHWAY TRUCK ENGINES INSTALLED IN BLUEBIRD CHASSIS
PRODUCT SUPPORT PROGRAM FOR CALIBRATING THE OIL LEVEL GAUGE (DIPSTICK) ON CERTAIN C32 MARINE ENGINES INSTALLED IN HATTERAS YACHTS PRODUCT SUPPORT PROGRAM FOR CALIBRATING THE OIL LEVEL GAUGE (DIPSTICK) ON CERTAIN C32 MARINE ENGINES INSTALLED IN HATTERAS YACHTS
PRODUCT SUPPORT PROGRAM FOR REWORKING 0R0805 AND 0R0807 WATER PUMPS IN DEALER PARTS STOCK PRODUCT SUPPORT PROGRAM FOR REWORKING 0R0805 AND 0R0807 WATER PUMPS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CYLINDER PACKS AND EXHAUST COMPONENTS ON CERTAIN 3456 GENSETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CYLINDER PACKS AND EXHAUST COMPONENTS ON CERTAIN 3456 GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DEFECTIVE RFI FILTERS ON CERTAIN 3406C, 3408C, 3412C MARINE AUXILIARY GENSETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DEFECTIVE RFI FILTERS ON CERTAIN 3406C, 3408C, 3412C MARINE AUXILIARY GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5304 AND 292-5307) PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5304 AND 292-5307)