Diagnostic Trouble Codes - MCS Control Panel Diagnostic Trouble Codes
The following codes are generated by the MCS control panel (if equipped).
8XXX codes are related to engine faults and are linked to the equivalent J1939 code in Table 1.
4XXX codes indicate faults that either cause an engine shutdown or indicate an open circuit for the sensor. These codes are detailed in Table 2.
Show/hide table
MCS Code     | Display Description     | J1939 Code     |
---|---|---|
8021     | EIC Overspeed 1     | 190-15     |
8061     | EIC Fuel R. P.1     | 157-16     |
8081     | Oil pres. Warn     | 100-17     |
8121     | EIC oil filt.1     | 99-15     |
8161     | EIC fuel filt.1     | 1382-15     |
8201     | EIC fuel filt.S     | 95-15     |
8221     | EIC Sea. P.1     | 2435-17     |
8241     | EIC Coolant P. 1     | 109-15     |
8261     | EIC Coolant T. 1     | 110-15     |
8341     | EIC Oil temp. 1     | 175-15     |
8481     | EIC Fuel Leak     | 1239-31     |
8541     | EIC Fuel f. P.1     |     |
Show/hide table
Channel Code     | Display Description     | Actions     |
---|---|---|
4110     | WB Hi. Cool. T     | There is an open circuit between the MCS coolant temperature sensor and the MCS control panel. Refer to the Electrical Schematic and investigate the wiring.     |
4121     | Cool temp shutdown     | The coolant temperature has reached the trip point where the control panel has shut down the engine. Refer to Troubleshooting, "Coolant Temperature Is High" to investigate the cause of the high coolant temperature.     |
4251     | Oil press shutdown     | The engine oil pressure has dropped to the trip point where the control panel has shut down the engine. Refer to Troubleshooting, "Oil Pressure Is Low" to investigate the cause of the low engine oil pressure.     |
4371     | WB Low oil pres     | There is an open circuit between the MCS oil pressure sensor and the MCS control panel. Refer to the Electrical Schematic and investigate the wiring.     |
4521     | Overspeed 2     | The MCS speed sensor has detected an engine overspeed. Refer to diagnostic code 190-0 in Troubleshooting, "Diagnostic Trouble Codes".     |
4551     | MPU Wire break     | There is an open circuit between the MCS speed sensor and the MCS control panel. Refer to the Electrical Schematic and investigate the wiring.     |
4591     | Underspeed 1     | The MCS speed sensor has detected an engine underspeed. Refer to Troubleshooting, "Engine Top Speed Is Not Obtained" for further information.     |
Caterpillar Information System:
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Hydraulic System Oil Level Is Low
349F and 352F Excavators Adjustable Gauge Undercarriage Frame
352F Excavator Operator Controls
2014/03/07 Clarification of the Oil Level Gauge Markings for Certain C18 Marine Engines {1326}
G3306B Generator Sets Fluid Recommendations
G3306B Generator Sets Refill Capacities
Product Link® E640 System Configuration File - Uninstall
XQC1600 Power Module Coolant (DEAC) - Change
390F Excavator Crankshaft Vibration Damper and Pulley - Remove and Install
G3306B Generator Sets Sensors and Electrical Components
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Sensor Signal (Analog, Active) - Test
390F Excavator Fan Drive - Assemble
C4.4 Marine Generator Set Walk-Around Inspection
C4.4 Marine Generator Set Self-Diagnostics
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Water Cannon Does Not Function
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100} ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor
G3306B Petroleum Generator Set Engines Aftertreatment Identification Module - Test
DE Series Generator Set With Cat C7.1 Engine Plate Locations and Film Locations
DE Series Generator Set With Cat C7.1 Engine Engine Identification
DE Series Generator Set With Cat C7.1 Engine Alternator - Inspect
DE Series Generator Set With Cat C7.1 Engine Battery - Replace
DE Series Generator Set With Cat C7.1 Engine Battery Electrolyte Level - Check
DE Series Generator Set With Cat C7.1 Engine Battery or Battery Cable - Disconnect