390F Excavator Caterpillar


Fan Drive - Assemble

Usage:

390F FEH

组装步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     1P-1861     挡圈钳     1    
B     -     Loctite Low Breakloose PST     -    
C     -     Loctite 271     -    



    图 1g01184150

  1. 使用适当的压具将轴承 (10) 、隔套 (11) 和轴承 (12) 安装到轴 (9) 上。

    注: 轴承 (10) 固定在轴 (9) 的底部。




    图 2g01184144

  1. 安装隔套 (8) 和环 (7) 。



    图 3g01184143

  1. 在螺母 (6) 上涂抹工具 (B) 。 安装密封件 (6) 。



    图 4g01184141

  1. 使用工具 (A) 安装挡圈 (5) 。



    图 5g01184152

  1. 将风扇驱动装置 (4) 安装到风扇支架中。

    注: 使用风扇马达的两颗安装螺栓将风扇驱动装置拉入风扇支架。




    图 6g01184139

    注: 某些车型配备了标准垫圈来代替锁止板

  1. 将工具 (C) 涂敷在螺栓 (3) 的螺纹上。 定位风扇接头 (2) ,然后安装螺栓 (3) 。 用 105 ± 20 N·m (77 ± 15 lb ft) 的扭矩拧紧螺栓 (3) 。 弯曲锁舌 (1) (如有配备)。

End By: 安装风扇驱动装置。

Caterpillar Information System:

390F Excavator Fan Drive - Disassemble
C4.4 Engines for Caterpillar Built Machines Alternator
UPS 750 Uninterruptible Power Supply Service Connections
390F Excavator Machine Systems Travel Counterbalance Valve
390F Excavator Machine Systems Displacement Change Valve
390F Excavator Machine Systems Travel Motor
Rewiring the Instrument Panel on Certain C175-16 and C280-16 Petroleum Engines{7451} Rewiring the Instrument Panel on Certain C175-16 and C280-16 Petroleum Engines{7451}
390F Excavator Fan Drive - Remove and Install
C4.4 Marine Generator Set Switch (Coolant Level) - Remove and Install - Coolant Level Switch for Sea water Cooled Engines
C3.3B and C3.8 Engines for Caterpillar Built Machines Intake Manifold Air Temperature Is High
390F Excavator Fan - Remove and Install
C4.4 Marine Generator Set Fuel System Secondary Filter - Replace
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Sensor Signal (Analog, Active) - Test
G3306B Generator Sets Sensors and Electrical Components
390F Excavator Crankshaft Vibration Damper and Pulley - Remove and Install
XQC1600 Power Module Coolant (DEAC) - Change
Product Link® E640 System Configuration File - Uninstall
G3306B Generator Sets Refill Capacities
G3306B Generator Sets Fluid Recommendations
2014/03/07 Clarification of the Oil Level Gauge Markings for Certain C18 Marine Engines {1326}
352F Excavator Operator Controls
349F and 352F Excavators Adjustable Gauge Undercarriage Frame
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Hydraulic System Oil Level Is Low
C4.4 Marine Generator Set Diagnostic Trouble Codes - MCS Control Panel Diagnostic Trouble Codes
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.