Alternator
The 12 V and 24 V Type 1 Alternators
Show/hide table
Illustration 1 | g02149533 |
Typical example |
(1) Terminal "B+"
- Tighten the nut on the terminal to the following. ...
7.5 N·m (66 lb in)
(2) Terminal "D+"
- Tighten the nut on the terminal to the following torque. ...
2.2 N·m (19 lb in)
(3) Terminal "B-" (if equipped)
- Tighten the nut on the terminal to the following torque. ...
7 N·m (62 lb in)
(4) Terminal "W"
- Tighten the nut on the terminal to the following torque. ...
2.2 N·m (19 lb in)
Tighten the nut for the alternator pulley to the following torque. ...
Output
- The outputs of the alternators ... 80 Amp, 100 Amp, 120 Amp, or 150 Amp
Show/hide table
Illustration 2 | g02151927 |
Typical example |
(1) Tighten the setscrews that secure the alternator to the bracket to the following torque. ...
(2) Tighten the setscrews that secure the bracket to the cylinder block to the following torque. ...
Caterpillar Information System:
UPS 750 Uninterruptible Power Supply Service Connections
390F Excavator Machine Systems Travel Counterbalance Valve
390F Excavator Machine Systems Displacement Change Valve
390F Excavator Machine Systems Travel Motor
Rewiring the Instrument Panel on Certain C175-16 and C280-16 Petroleum Engines{7451} Rewiring the Instrument Panel on Certain C175-16 and C280-16 Petroleum Engines{7451}
390F Excavator Fan Drive - Remove and Install
C4.4 Marine Generator Set Switch (Coolant Level) - Remove and Install - Coolant Level Switch for Sea water Cooled Engines
C3.3B and C3.8 Engines for Caterpillar Built Machines Intake Manifold Air Temperature Is High
390F Excavator Fan - Remove and Install
C4.4 Marine Generator Set Fuel System Secondary Filter - Replace
C13, C15, and C18 Tier 4 Final Engines Oil Temperature Is High
XQC1600 Power Module Engine Crankcase Breather - Clean
390F Excavator Fan Drive - Disassemble
390F Excavator Fan Drive - Assemble
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Sensor Signal (Analog, Active) - Test
G3306B Generator Sets Sensors and Electrical Components
390F Excavator Crankshaft Vibration Damper and Pulley - Remove and Install
XQC1600 Power Module Coolant (DEAC) - Change
Product Link® E640 System Configuration File - Uninstall
G3306B Generator Sets Refill Capacities
G3306B Generator Sets Fluid Recommendations
2014/03/07 Clarification of the Oil Level Gauge Markings for Certain C18 Marine Engines {1326}
352F Excavator Operator Controls
349F and 352F Excavators Adjustable Gauge Undercarriage Frame