Aftertreatment Identification Module - Test
Table 1 lists the diagnostic trouble codes for the Aftertreatment Identification Module.
Show/hide table
Diagnostic Codes     | |
---|---|
J1939 Code and Description     | System Response     |
5576-2 Aftertreatment #1 Identification : Erratic, Intermittent, or Incorrect     | The Aftertreatment Identification Module is not installed. If the engine is not currently running, the engine will not restart. If, the engine is running the engine will shut down within 60 seconds.     |
5576-8 Aftertreatment #1 Identification : Abnormal Frequency, Pulse Width, or Period     | The installed Aftertreatment Identification Module is not a match to the engine.     |
Show/hide table
Troubleshooting Test Steps     | Values     | Results     |
---|---|---|
1. Check for Diagnostic Trouble Codes A. Establish communication between Caterpillar Electronic Technician (ET) and the Electronic Control Module (ECM). Refer to Troubleshooting, "Electronic Service Tools", if necessary.     |
Diagnostic trouble codes     |
Result: A 5576-2 or 5576-8 diagnostic code is active. Proceed to Test Step 2.     |
Show/hide table
Illustration 1 | g03644790 |
(1) Engine ECM (2) Aftertreatment Identification Module |
Show/hide table
Troubleshooting Test Steps     | Values     | Results     |
---|---|---|
2. Check the Aftertreatment Identification Module A. Ensure that the Aftertreatment Identification Module is installed.     |
Diagnostic trouble codes     |
Result: The Aftertreatment Identification Module is installed. A 5576-8 is still active. Repair: Install a certified Aftertreatment Identification Module. Contact your dealer for additional information.     |
Caterpillar Information System:
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor
ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100} ACERT Cylinder Heads Are Used in the "Platinum" Rebuild Kits for Certain 3406E, C-15, and C-16 Truck Engines {1000, 1100}
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Water Cannon Does Not Function
C4.4 Marine Generator Set Self-Diagnostics
C4.4 Marine Generator Set Walk-Around Inspection
C4.4 Marine Generator Set Diagnostic Trouble Codes - MCS Control Panel Diagnostic Trouble Codes
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Hydraulic System Oil Level Is Low
349F and 352F Excavators Adjustable Gauge Undercarriage Frame
352F Excavator Operator Controls
2014/03/07 Clarification of the Oil Level Gauge Markings for Certain C18 Marine Engines {1326}
G3306B Generator Sets Fluid Recommendations
G3306B Generator Sets Refill Capacities
DE Series Generator Set With Cat C7.1 Engine Plate Locations and Film Locations
DE Series Generator Set With Cat C7.1 Engine Engine Identification
DE Series Generator Set With Cat C7.1 Engine Alternator - Inspect
DE Series Generator Set With Cat C7.1 Engine Battery - Replace
DE Series Generator Set With Cat C7.1 Engine Battery Electrolyte Level - Check
DE Series Generator Set With Cat C7.1 Engine Battery or Battery Cable - Disconnect
DE Series Generator Set With Cat C7.1 Engine Alternator Belt - Inspect/Adjust/Replace
DE Series Generator Set With Cat C7.1 Engine Cooling System Coolant (ELC) - Change
DE Series Generator Set With Cat C7.1 Engine Cooling System Coolant Extender (ELC) - Add
DE Series Generator Set With Cat C7.1 Engine Cooling System Coolant Level - Check
DE Series Generator Set With Cat C7.1 Engine Cooling System Water Temperature Regulator - Replace
390F Excavator Machine Systems System Pressure - Release