- Caterpillar Products: All
Introduction
Do not perform any procedure that is outlined in this publication until you understand the information that is contained in this document.
Harness Assemblies
The 217-0114 Adapter Cable As must be used with the 217-0113 Wiring Harness to flash software or to troubleshoot problems on Caterpillar engine Electronic Control Modules (ECMs).
 | |
| Illustration 1 | g02730540 |
(1) 217-0114 Adapter Cable As (2) 328-2292 Harness | |
 | |
| Illustration 2 | g02733638 |
(3) 217-0113 Wiring Harness | |
The 217-0114 Adapter Cable As has been replaced by the 328-2292 Harness .
Note: The 328-2292 Harness has additional protections to eliminate the risk of damaging non-engine ECMs. This protection only prevents damage to CAT non-engine ECMs and will not allow 328-2292 to work on these ECMs. Refer to Table 1.
| Part Number | Part Name | ECM Application |
| 224-4899 | Harness | CAT/Perkins Engines and Challenger ECMs |
| 277-4734 | Harness | Perkins Engines |
| 317-2652 | Control Harness As | CAT Implement and Transmission ECMs |
The 217-0114 Adapter Cable As and the 328-2292 Harness replaced the 167-9225 Harness .
Note: The 167-9225 Harness and the 217-0114 Adapter Cable As change level 00 and 01 may damage the internal circuitry of non-engine ECMs when the connected to a 12VDC or 24VDC power supply. These harnesses should ONLY be used to service Caterpillar engine ECMs. For questions, contact the Dealer Service Tools Hotline at 1-800-542-8665 (US) or, 1-309-675-6277 (worldwide).