Electric Starting Motor
Show/hide table
| |
| 图 1 | g02560026 |
Show/hide table
| 207-1548 电起动马达总成技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 6V-8188 螺母 | 拧紧至扭矩为 |
| 2 | 1 | - | 20V 和 1. 拉动绕组为 57 amp 2. 保持绕组为 16 amp 3. 最大额定电压为 850 amp |
| B | - | - | 小齿轮和壳体之间的间隙为 |
| 3 | 1 | 6V-8378 螺母 | 拧紧至扭矩为 |
| 4 | 1 | 6V-8188 螺母 | 蓄电池端子螺母最多可使用三条电缆或导线端子。 两个接线端最高不低于 0 AWG。
拧紧至扭矩为 |
| 5 | 1 | 6V-8378 螺母 | 开关接线端必须用热收缩管绝缘。 不要使用模压接线端。
拧紧至扭矩为 |
| 6 | 1 | 6V-8188 螺母 | 拧紧至扭矩为 |
| 7 | - | - | 拧紧至扭矩为 |
| - | - | - | 当从小齿轮端观看电起动马达时，马达顺时针旋转。
1. 转速为 7643 ± 1683 rpm 2. 电流消耗为 76.5 ± 14.5 amp 3. 电压为 23 V |
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Boom - Fore Boom Group - 3.3 m (10.83 ft)
320E and 323E Excavators Machine System Specifications Boom - 5.7 m (18.62 ft)
320E and 323E Excavators Machine System Specifications Control Valve
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
2011/11/02 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}
2011/10/13 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}
Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274} Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274}
Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000} Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Components
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators General Information
C-12 Engine Maintenance Interval Schedule
320E and 323E Excavators Machine System Specifications Boom - Stub Boom - 2.7 m (8.79 ft)
320E and 323E Excavators Machine System Specifications Boom Cylinder
2011/11/16 A New Relief Tube for the High-Pressure Fuel Pump Is Used on C175-16 Engines {1274, 1702}
Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620} Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620}
XQ570 Rental Generator Set Rotating Rectifier - Check
3516C Generator Sets Maintain Selective Catalytic Reduction Inlet Temperature
PM3516 Power Modules Generator Bearing Temperature - Test/Record
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Engine Electronics
3512C and 3516C Marine Auxiliary and Generator Set Engines Gauges and Indicators
312F and 313F Excavators Plate Locations and Film Locations
320E and 323E Excavators Machine System Specifications Boom Cylinder Lines
320E and 323E Excavators Machine System Specifications Boom Lines