Boom Cylinder
Show/hide table
Illustration 1 | g02727187 |
Show/hide table
Specification for 341-2790 Boom Cylinder and Seal Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 240-2913 Bushing | Bore before assembly is Installation depth is |
2 | 12 | 8T-1447 Bolt | Torque to |
A | 1 | 352-1096 Boom Cylinder As | Bore is |
B | 1 | 352-1102 Rod As | Diameter is |
3 | 1 | 357-5717 Bushing | Bore before assembly is Installation depth is |
4 | 1 | 3B-8489 Grease Fitting | Torque to |
5 | 1 | 096-4402 Bushing | Outside diameter before assembly is Thickness is |
6 | 1 | 247-8864 Piston | Torque to |
7 | 1 | 096-3216 Socket Setscrew | Torque to After tightening the socket setscrew, stake the socket setscrew in two places. |
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Boom - Stub Boom - 2.7 m (8.79 ft)
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
320E and 323E Excavators Machine System Specifications Boom - Fore Boom Group - 3.3 m (10.83 ft)
320E and 323E Excavators Machine System Specifications Boom - 5.7 m (18.62 ft)
320E and 323E Excavators Machine System Specifications Control Valve
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
2011/11/02 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}
2011/10/13 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}
Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274} Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274}
Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000} Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Components
2011/11/16 A New Relief Tube for the High-Pressure Fuel Pump Is Used on C175-16 Engines {1274, 1702}
Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620} Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620}
XQ570 Rental Generator Set Rotating Rectifier - Check
3516C Generator Sets Maintain Selective Catalytic Reduction Inlet Temperature
PM3516 Power Modules Generator Bearing Temperature - Test/Record
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Engine Electronics
3512C and 3516C Marine Auxiliary and Generator Set Engines Gauges and Indicators
312F and 313F Excavators Plate Locations and Film Locations
320E and 323E Excavators Machine System Specifications Boom Cylinder Lines
320E and 323E Excavators Machine System Specifications Boom Lines
Installation of the 324-7875 Control Box Gp for G3600 Engines {1917, 1924, 4460, 7426} Installation of the 324-7875 Control Box Gp for G3600 Engines {1917, 1924, 4460, 7426}
2011/12/15 A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}