- Electric Power Generation: All
Introduction
The information in this Special Instruction guides the user in downloading and installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets.
Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.
A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly.
Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.
Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not specifically recommended by Caterpillar is used, ensure that it is safe for you and for other people to use.
Ensure that the product will not be damaged or the product will be made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used.
Parts
| 356-6636 Film Kit (1) | ||
|---|---|---|
| Part Number | Description | Quantity |
| 353-2443 | Software | 1 |
| 356-6720 | Film | 1 |
| ( 1 ) | Caterpillar |
| 356-6645 Film Kit (1) | ||
|---|---|---|
| Part Number | Description | Quantity |
| 353-2443 | Software | 1 |
| 356-6721 | Film | 1 |
| ( 1 ) | FG Wilson |
Procedure
 | |
| Illustration 1 | g02731647 |
356-6720 Film | |
 | |
| Illustration 2 | g02731648 |
356-6721 Film | |
The annunciator film kit comprises a modifiable 353-2443 Software for customer configuration of Genesys Annunciator event identification film insert. The installation of the customer configurable event identification film insert requires the use of (Caterpillar) (1) or 356-6645 Film Kit (FG Wilson) (2). The version of the 353-2443 Software is 3532443.xls. The 353-2443 Software can be obtained from Downloads/Additional Downloads/Gensys Annunciator Custom Language Film section of the SIS Web.
Procedure for Installing the Film
- Upon obtaining the modifiable software file, open the file and follow the instructions included in the file to make the desired modifications.
- Print and trim the modified film insert
- Position the insert into the custom film sleeve.
- Remove the adhesive backing from the cover layer of the film sleeve and adhere the cover.
Note: Press out any air pockets and bubbles from beneath the cover layer.
- Firmly press the cover layer in place.
- Clean the film mounting surface on the Annunciator.
Note: The surface must be dry and free of dirt and oils.
- Remove the adhesive backing from the custom film sleeve assembly and carefully position the custom film sleeve assembly on the Annunciator module.
- Firmly press the custom film sleeve assembly in place.
Note: A roller may be used to ensure complete adhesion of the film to the Annunciator module.