320E and 323E Excavators Machine System Specifications Caterpillar

Boom - Fore Boom Group - 3.3 m (10.83 ft)

Usage:

320E LN DFG

Show/hide table




Illustration 1	g02727142

Show/hide table

Table 1
Specification for 364-5099 Fore Boom Gp
Item	Qty	Part	Specification Description
All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame, and the cylinder pin bores.
1	1	4I-4621 Pin As	Diameter is 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).
2	1	4I-4618 Pin As	Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch).
3	1	346-7276 Pin As	Diameter is 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).
4	As required, use the following shims to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
	3	113-2127 Shim	Thickness is 0.5 mm (0.02 inch).
	3	093-0084 Shim	Thickness is 1.0 mm (0.04 inch).
5	2	7x-4803 Lip Type Seal	Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
6	2	228-5615 Bushing	Install the bushing in the bore so that the part number of the bushing is facing outward. Inside diameter before assembly is 90.25 ± 0.04 mm (3.553 ± 0.002 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch).
7	As required, use the following shims to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
	2	133-2425 Shim	Thickness is 0.5 mm (0.02 inch).
	1	093-0083 Shim	Thickness is 1.0 mm (0.04 inch).
	1	093-0115 Shim	Thickness is 2.0 mm (0.08 inch).
8	As required, use the following shims to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
8	3	093-0116 Shim	Thickness is 2.0 mm (0.08 inch).

Caterpillar Information System:

320E and 323E Excavators Machine System Specifications Boom - 5.7 m (18.62 ft)

320E and 323E Excavators Machine System Specifications Control Valve

349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

2011/11/02 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}

2011/10/13 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}

Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274} Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274}

Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000} Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000}

Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Components

Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators General Information

C-12 Engine Maintenance Interval Schedule

Cat® Detect Object Detection System System Schematic

C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor

320E and 323E Excavators Machine System Specifications Boom - Stub Boom - 2.7 m (8.79 ft)

320E and 323E Excavators Machine System Specifications Boom Cylinder

2011/11/16 A New Relief Tube for the High-Pressure Fuel Pump Is Used on C175-16 Engines {1274, 1702}

Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620} Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620}

XQ570 Rental Generator Set Rotating Rectifier - Check

3516C Generator Sets Maintain Selective Catalytic Reduction Inlet Temperature

PM3516 Power Modules Generator Bearing Temperature - Test/Record

3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Engine Electronics

3512C and 3516C Marine Auxiliary and Generator Set Engines Gauges and Indicators

312F and 313F Excavators Plate Locations and Film Locations

320E and 323E Excavators Machine System Specifications Boom Cylinder Lines