Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Caterpillar

General Information

Usage:

352F-VG A9J

Introduction

The Cat^® Grade Control system is designed for earthmoving equipment in the construction application. The system can be used as-is or upgraded with a wide variety of AccuGrade^TM options to expand functionality. The information that is provided can assist the operator to maintain accurate bucket guidance according to the project requirements.

System Overview

The Cat Grade Control system provides elevation and slope guidance. The system continually calculates the elevation difference between a reference surface and the tip of the bucket teeth. This elevation difference is used to inform the operator where the bucket tooth tip is in relation to the reference point (above, below, or on-grade).

The Cat Grade Control system does not provide a horizontal position. Therefore, design files, background maps, and avoidance zones are not supported by Cat Grade Control.

The Cat Grade Control system is upgradable to AccuGrade to allow the operator greater functionality such as 3D support (GPS/UTS) and other 1D/2D features (profile support) not available in Cat Grade Control.

Caterpillar Information System:

C-12 Engine Maintenance Interval Schedule

Cat® Detect Object Detection System System Schematic

Cat® Detect Object Detection System Display Module - Flash Program

Cat® Detect Object Detection System Display Module - Replace

Cat® Detect Object Detection System Wiring Harness (Short Circuit) - Test

Cat® Detect Object Detection System Wiring Harness (Open Circuit) - Test

Cat® Detect Object Detection System Electrical Connector - Inspect

Cat® Detect Object Detection System Object Detection Sensor - Adjust

Cat® Detect Object Detection System Object Detection Sensor - Calibrate

2014/06/13 Repairing Expansion Tank Support Brackets for Certain 3500 Engines {1354}

C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing

C13, C15, and C18 Tier 4 Final Engines Flywheel

Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Components

Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000} Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000}

Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274} Electrical Wiring Connection Modification for 1400 Frame Generator Space Heater{1408, 4450, 7274}

2011/10/13 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}

2011/11/02 Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280} 295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust

320E and 323E Excavators Machine System Specifications Control Valve

320E and 323E Excavators Machine System Specifications Boom - 5.7 m (18.62 ft)

320E and 323E Excavators Machine System Specifications Boom - Fore Boom Group - 3.3 m (10.83 ft)

C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor

320E and 323E Excavators Machine System Specifications Boom - Stub Boom - 2.7 m (8.79 ft)