914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Caterpillar


Wiring Harness (Open Circuit) - Test

Usage:

IT14G 1WN
断路是指使电流不流动的电路故障。 开路是由电气导线故障或电气接头连接不良引起的。 电气导线或连接断开时,电路中的电流就会中断流动。 常闭电路的电阻值应小于 5 欧姆。 下述步骤将说明断路测试:

参考有关完整的电气示意图,请参考正在维修的机器的电气系统示意图。

测试有无断路。

  1. 确定可疑电路中的接头和导线编号。 使用机器的电气系统示意图检查电路。

  1. 将钥匙起动开关和断路开关转到断开位置。

  1. 从导线线束上断开部件和 ECM(Electronic Control Module,电子控制模块)。

  1. 在一个断开的线束连接上,将一根跨接导线连在可疑导线的触点与机架接地之间。

  1. 在机器线束的其他接头处,使用万用表表笔测量可疑导线触点和机架接地之间的电阻。

    预期结果:电阻小于 5 欧姆。

    正常 - 电阻小于 5 欧姆。 线束电路正常。

    停止。

    异常 - 电阻大于 5.0 欧姆。 机器线束中存在断路。

    修理:修理或更换机器线束。

    停止。

Caterpillar Information System:

980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Steering Control Valve - Assemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Steering Control Valve - Disassemble
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Symptom Troubleshooting
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Emerging Symptom Information
R1600G Load Haul Dump 3176C Engine Supplement Engine, Torque Converter and Updrive Gears - Install
C9.3 Tier 4 Final Engines Belt Tensioner - Alternator and Compressor
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
Excessive Wear of the Crankshaft Rear Thrust Washer in Large Off-Highway Trucks{1202} Excessive Wear of the Crankshaft Rear Thrust Washer in Large Off-Highway Trucks{1202}
C9.3 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove and Install
C9.3 Engines for Caterpillar Built Machines Compression Brake - Remove and Install
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122} 142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
C9.3 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Wiring Harness (Short Circuit) - Test
3516B Engine for 994F and 994H Wheel Loaders Electrical Power Supply - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
2011/05/25 Updated Cat EPD Alternator Failure Report Template Is Now Available for Cat Generator Sets {1404}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Cat Data Link
Cat® Detect Object Detection Camera - Clean
Cat® Detect Object Detection Configuration Screen
Cat® Detect Object Detection Diagnostic Summary Screen
Cat® Detect Object Detection Display - Clean
Cat® Detect Object Detection Display Navigation
Cat® Detect Object Detection General Information
Cat® Detect Object Detection Main Screen
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.