Illustration 1 | g02590597 |
(1) Camera View (2) Arrows Button (3) "OK" Button (4) Tab Button (5) Brightness Button (6) Alarm Check (7) Alarm (8) Product ID (9) System Status Indicator (10) Proximity Bar |
Display Buttons
Arrow Button
Arrow button - The arrow button is used in order to perform the following functions: |
- Toggle the display between the camera views (front, rear, left, and right)
- Highlight a selection (up/down and left/right)
- Manually adjust brightness level after the brightness button is depressed (right/ left)
OK Button
OK button - The "OK" button is used in order to edit settings. The operator must press the "OK" button to enter the settings. After pressing the "OK" button, the first parameter in the list that can be configured will be highlighted. The highlighted parameter can then be changed. |
Tab Button
Tab button - Use the tab button in order to change the active screen between the main screen, the configuration screen, and the diagnostic summary screen. |
The order of screens is defined in Illustration 2. Each arrow represents one press of the tab button.
Illustration 2 | g02667562 |
(11) Main Screen (12) Configuration Screen (13) Diagnostic Summary Screen |
Brightness Button
Brightness button - Press the brightness button once in order to allow manual adjustment of the brightness for the display screen. Press and hold the brightness button for 2 seconds in order to enable/disable night mode for the display screen. |
Note: The night mode will adjust the display to the minimum brightness setting in order to reduce the amount of light emitted during night time operation. The night mode brightness can be adjusted up or down and will be remembered the next time the night mode feature is enabled. When the display returns to the day mode the brightness setting will automatically adjust the 75 percent brightness. If necessary, adjust the brightness manually for personal view preferences.
Alarm Check / Alarm Snooze
Alarm check / snooze button - The alarm check cancels any changes that were made in the configuration screen. The alarm check button also can be used to snooze the audible alarm. The alarm snooze feature is only available when the alarm is active and will automatically turn off when there is a directional change (F/R) or when the system enters STANDBY. If the object is still present or a new object appears, the system will sound the audible alarm again. |