- Display
- Medium range radar object detection sensor
- Cameras (front, left, right, and rear)
- External lights
- Switch for external lights
Display
Mountings
 | |
| Illustration 1 | g02581499 |
(1) Ceiling Mount | |
 | |
| Illustration 2 | g02027739 |
(2) Pedestal Mount | |
There are two mountings available for the display. The ceiling mount is mounted to the upper left of the operator, to the ceiling of the cab. The pedestal mount is mounted to the right of the operator, on the floor of the cab. Refer to the Illustrations 1 and 2 above.
Display
 | |
| Illustration 3 | g02606362 |
(3) Camera View (4) Arrows Button (5) "OK" Button (6) Tab Button (7) Brightness Button (8) Alarm Check (9) Alarm (10) Product ID (11) Indicator for the System (12) Proximity Bar | |
The following information lists the functions of the display:
- The display monitors the data from the system components
- The display monitors the status of the system components
- The display shows the information to the operator
- The display warns the operator of objects and/or faults
- The display provides an operator interface in order to control the system
The display consists of the following components:
- Button (function) that are located on the right side of the display
- An audible alarm that is located on the bottom right portion of the display
Medium Range Object Detection Sensor
 | |
| Illustration 4 | g02662616 |
(13) Medium Range Object Detection Sensor Enclosure (14) Medium Range Object Detection Sensor | |
Two medium range radar sensors are used on the front of the machine. Four medium range radar sensors are used on the rear of the machine. One sensor will be used on each side of the machine. Sensors provide information for the range to the object.
Component Locations
Front Object Detection Sensors and Camera
 | |
| Illustration 5 | g02649358 |
(15) Front Camera | |
 | |
| Illustration 6 | g02662656 |
(16) Front Object Detection Sensor | |
Rear Object Detection Sensor and Camera
 | |
| Illustration 7 | g02649422 |
(17) Rear Object Detection Sensors and Camera | |
Left Object Detection Sensor, Camera, and External Light
 | |
| Illustration 8 | g02583696 |
(18) External Light (19) Camera (20) Left Object Detection Sensor | |
Right Object Detection Sensor, Camera, and External Light
 | |
| Illustration 9 | g02584316 |
Right Object Detection Sensor, Camera, and External Light | |
Display
 | |
| Illustration 10 | g02581556 |
Display for Cat Detect Object Detection System | |
Camera
 | |
| Illustration 11 | g01223051 |
The cameras provide the operator with a view of critical areas around the truck for use in identifying objects
External Lights
 | |
| Illustration 12 | g01843254 |
Example of an External Light | |
The external lights are mounted to the same brackets that are used for the cameras. The mounting brackets are installed on the left side and the right side of the machine. The lights provide illumination for the cameras that are installed on the sides of the machine. The lights are controlled by the display.