Engine to Torque Converter - Connect
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 189-0412 | Clevis | 1 |
B | 1U-9200 | Lever Puller Hoist Gp | 1 |
138-7574 | Link Bracket | 1 |
- Install O-ring seals (3) and (4).
Show/hide table
Illustration 2 g02320096 - Attach Tooling (A), Tooling (B), and a suitable lifting device to torque converter (1). The weight of torque converter (1) is approximately
2041 kg (4500 lb) . Position torque converter (1) onto the engine.Show/hide tableIllustration 3 g02320593 - Install bolts (2) to torque converter (1).
Show/hide table
Illustration 1 | g02320661 |
End By:
- Install the engine and the torque converter.
Caterpillar Information System:
980K Wheel Loader Braking and Hydraulic Fan System Parking Brake - Test
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Brake System Air - Purge
966K XE Wheel Loader C9.3 Engine Supplement Clean Emissions Module - Remove and Install
953D Track-Type Loader Mirror
953D Track-Type Loader Visibility Information
953D Track-Type Loader Slope Operation
Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073} Bench Test Procedure for a D6T and D6R Track-Type Tractor and PL72 Pipelayer Transmission{3030, 3073}
980K Wheel Loader Braking and Hydraulic Fan System Service Brakes - Test
D6N Track-Type Tractor Additional Messages
966K XE Wheel Loader Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
C13 Engines for Caterpillar Built Machines Idler Pulley
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Parking Brake Actuator - Adjust
D8T, D9T and D11T Track-Type Tractors Monitoring System Warning Operation
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
336E Excavator Machine System Specifications Stick Cylinder Lines
953D Welding Tractor Belt - Inspect/Replace
953D Welding Tractor Drive Shaft - Lubricate
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
D8T, D9T and D11T Track-Type Tractors Monitoring System Menu Navigation
994H Wheel Loader Electrohydraulic System Main Control Valve - Left Side
Rework Procedure for the Improved Ride Control Lines Group{5004, 5057, 5057} Rework Procedure for the Improved Ride Control Lines Group{5004, 5057, 5057}