Pressure Sensor (DPF) - Remove and Install
Removal Procedure
- Disconnect harness assembly (1) . Remove pressure sensor (2) and O-ring seal (3) .
Show/hide table
Illustration 1 | g02321394 |
View of the CEM and sensor location. |
Show/hide table
Illustration 2 | g02321395 |
Installation Procedure
- Install pressure sensor (2) in reverse order.
- Tighten pressure sensor (2) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
Note: Do not pre-tighten the sensor using the plastic portion of the sensor. Pre-tighten the sensor using the metal hex portion of the sensor. Damage can occur to the sensor if pre-tightened using the plastic portion of the sensor.
Caterpillar Information System:
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
D8T, D9T and D11T Track-Type Tractors Monitoring System Warning Operation
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Parking Brake Actuator - Adjust
854K Wheel Dozer and 992K Wheel Loader Engine to Torque Converter - Connect
980K Wheel Loader Braking and Hydraulic Fan System Parking Brake - Test
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Brake System Air - Purge
966K XE Wheel Loader C9.3 Engine Supplement Clean Emissions Module - Remove and Install
953D Track-Type Loader Mirror
953D Track-Type Loader Visibility Information
953D Track-Type Loader Slope Operation
336E Excavator Machine System Specifications Stick Cylinder Lines
953D Welding Tractor Belt - Inspect/Replace
953D Welding Tractor Drive Shaft - Lubricate
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
D8T, D9T and D11T Track-Type Tractors Monitoring System Menu Navigation
994H Wheel Loader Electrohydraulic System Main Control Valve - Left Side
Rework Procedure for the Improved Ride Control Lines Group{5004, 5057, 5057} Rework Procedure for the Improved Ride Control Lines Group{5004, 5057, 5057}
C13 Tier 4 Final Engines Idler Pulley
C13 Engines for Caterpillar Built Machines Electric Starting Motor
330F MHPU Mobile Hydraulic Power Unit Machine System Hoist Solenoid Valve - Boom Lowering
C9.3 Engines for D7E Track-Type Tractors Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines Prelubrication Pump Problem