336E Excavator Machine System Specifications Caterpillar


Stick Cylinder Lines

Usage:

336E L BZY


Illustration 1g06404365

Table 1
Item  Qty  Part  Specification Description 
535-8981 Pipe As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
The distance from the center of the mounting pin to the support assembly is 290.0 ± 3.0 mm (11.42 ± 0.12 inch)
The distance from the center of the mounting pin to the support assembly is 1430.0 ± 3.0 mm (56.30 ± 0.12 inch)
8T-4186 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in)
8T-4194 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
457-5821 Bolt  Torque to 32 ± 6 N·m (283 ± 53 lb in)
Orient the support assemblies to the angle of 20 ± 3 degrees. 

Caterpillar Information System:

C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Brake Accumulator - Test and Charge
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
D8T, D9T and D11T Track-Type Tractors Monitoring System Warning Operation
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Parking Brake Actuator - Adjust
854K Wheel Dozer and 992K Wheel Loader Engine to Torque Converter - Connect
980K Wheel Loader Braking and Hydraulic Fan System Parking Brake - Test
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Brake System Air - Purge
966K XE Wheel Loader C9.3 Engine Supplement Clean Emissions Module - Remove and Install
953D Track-Type Loader Mirror
953D Track-Type Loader Visibility Information
953D Welding Tractor Belt - Inspect/Replace
953D Welding Tractor Drive Shaft - Lubricate
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
D8T, D9T and D11T Track-Type Tractors Monitoring System Menu Navigation
994H Wheel Loader Electrohydraulic System Main Control Valve - Left Side
Rework Procedure for the Improved Ride Control Lines Group{5004, 5057, 5057} Rework Procedure for the Improved Ride Control Lines Group{5004, 5057, 5057}
C13 Tier 4 Final Engines Idler Pulley
C13 Engines for Caterpillar Built Machines Electric Starting Motor
330F MHPU Mobile Hydraulic Power Unit Machine System Hoist Solenoid Valve - Boom Lowering
C9.3 Engines for D7E Track-Type Tractors Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines Prelubrication Pump Problem
C13 Tier 4 Final Engines Fuel Pressure Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.