Exhaust Manifold - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 1     |
B     | 5P-3931     | 防粘结剂     | -     |
- 将工具 (A) 和适当的起吊设备连接到排气歧管 (7) 上。 排气歧管的重量约为 29 kg (65 lb)。
Show/hide table
图 1 | g01925101 |
- 将密封垫和排气歧管 (7) 在缸盖上放置到位。
- 将工具 (B) 涂抹在将排气歧管固定在位的螺栓 (8) 的螺纹上。 安装螺栓 (8) 。
- 将密封垫、隔套、O 型密封圈 和管组件 (6) 放置到位。 安装螺栓。
- 连接软管 (5) 并拧紧卡箍组件。
- 连接管组件 (4) 。
- 将变压器 (3) 和线束组件安置在排气歧管上。
Show/hide table
图 2 | g01925099 |
- 安装螺栓 (2) 。
- 安装火花塞导线。
- 连接管组件 (1) 。
- 向冷却系统加注冷却液到正确的液位。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
End By:
- 安装电子控制模块。
- 安装涡轮增压器。
Caterpillar Information System:
C13 Engine for Combat and Tactical Vehicles Turbocharger
C7 Industrial Engines Turbocharger
2009/06/08 The Packaging Consist of the C9 Genset Has Been Changed {1000, 1021, 7002}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
2009/06/22 Fuel Injection Pump Latch Valve {1251}
C7 Engines for Combat and Tactical Vehicles Safety Messages
G3304B and G3306B Engines Exhaust Manifold - Remove
C32 Petroleum Engines Monitoring System
C9 Engine Monitoring System
C13 Engine for Caterpillar Built Machines Accessory Drive - Remove and Install - Brackets and Pulleys
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
C7.1 Industrial Engine Diesel Particulate Filter - Clean
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Tier 4 Final Engines Water Lines
3512B and 3516B Engines Exhaust Manifold
C32 Petroleum Engines General Hazard Information
3000 Frame SR5 Electric Power Generation Coupling - Remove
C9.3 Industrial Engine Turbocharger
3000 Frame SR5 Electric Power Generation Coupling - Install
3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install
C9 Marine Engines Diagnostic Flash Code Retrieval
C9 Marine Engines Configuration Parameters
797 Off-Highway Truck Front Suspension (Cylinder) - Disassemble