Relief Valve (Fuel) - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A.     | 5P-0332     | 开口扳手     | 1     |
B     | 129-1966     | 多功能润滑脂     | 1     |
开始:
- 拆下排气传感器管。
Show/hide table
注意 |
---|
触及高压燃油可能导致人身伤害或死亡。在对发动机燃油管进行任何维修或修理前,应在关闭发动机后等待 60 秒钟,以释放压力。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检查, 保养, 测试, 调整 和 维修发动机时,务必留心,确保将溢出的液体盛装在容器中。在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
Show/hide table
接触高压燃油可能导致液体渗透和烧伤危险。 高压燃油溢出可能会产生火灾。 如果不遵循检查、保养和维修指南,可能会造成人身伤亡。 |
- 将燃油供应转到断开位置。
- 断开蓄电池。 请参阅操作和保养手册, "蓄电池或蓄电池电缆 - 断开"。
- 拆下所有部件以接近导线线束。
- 松开卡箍组件 (1) ,然后拆下软管 (2) 。
Show/hide table
图 1 | g02140798 |
- 断开接头 (3) 和 (7) 。
Show/hide table
图 2 | g02140852 |
- 拆下螺栓 (5) 、 (6) 和 (8) ,然后拆下管组件 (4) 。
- 拆下螺栓 (9) 。
- 拆下螺母 (10) ,然后拆下支架 (11) 。
Show/hide table
图 3 | g02140971 |
- 断开线束组件 (12) 。
- 用电缆扎带将线束组件 (13) 移到一边。
Show/hide table
图 4 | g02141940 |
典型示例 |
Show/hide table
图 5 | g02141948 |
Show/hide table
图 6 | g02156903 |
- 断开管组件 (16) ,然后拆下接头 (15) 。
- 使用工具 (A) 拆下安全阀 (14) ,然后拆下 O 形密封圈。
注: 安全阀 (14) 是一个不可拆解的两件式阀。
注: 切勿在位置 (X) 上使用工具 (A) 。
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 按照相反顺序安装安全阀 (14) 。
- 将工具 (B) 涂抹到安全阀 (14) 的螺纹上。 将安全阀 (14) 安装到燃油歧管中。 使用 (A) 将安全阀 (14) 拧紧至扭矩为 60 ± 5 N·m (44 ± 4 lb ft)。 将安全阀 (14) 松开至扭矩为 5 ± 3 N·m (44 ± 27 lb ft)。 再次将安全阀 (14) 拧紧至扭矩为 20 ± 2 N·m (177 ± 18 lb ft)。 再将安全阀 (14) 转动 18° 度。 然后再次将安全阀 (14) 拧紧至扭矩为 90 ± 20 N·m (66 ± 15 lb ft)。
Caterpillar Information System:
C7.1 Industrial Engine Diesel Particulate Filter - Clean
G3304B and G3306B Engines Exhaust Manifold - Install
C13 Engine for Combat and Tactical Vehicles Turbocharger
C7 Industrial Engines Turbocharger
2009/06/08 The Packaging Consist of the C9 Genset Has Been Changed {1000, 1021, 7002}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
2009/06/22 Fuel Injection Pump Latch Valve {1251}
C7 Engines for Combat and Tactical Vehicles Safety Messages
G3304B and G3306B Engines Exhaust Manifold - Remove
C32 Petroleum Engines Monitoring System
C9 Engine Monitoring System
C9.3 Tier 4 Final Engines Water Lines
3512B and 3516B Engines Exhaust Manifold
C32 Petroleum Engines General Hazard Information
3000 Frame SR5 Electric Power Generation Coupling - Remove
C9.3 Industrial Engine Turbocharger
3000 Frame SR5 Electric Power Generation Coupling - Install
3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install
C9 Marine Engines Diagnostic Flash Code Retrieval
C9 Marine Engines Configuration Parameters
797 Off-Highway Truck Front Suspension (Cylinder) - Disassemble
797 Off-Highway Truck Front Suspension (Cylinder) - Assemble
The Loss of Fuel Prime in Some C32 Engines{1250, 1280} The Loss of Fuel Prime in Some C32 Engines{1250, 1280}