Turbocharger
Show/hide table
Illustration 1 | g01926013 |
(1) Wastegate
- Setting of the wastegate ...
213.7 ± 35 kPa (31 ± 5 psi)
(2) Nuts for mounting the turbocharger
- ApplyLoctite# 51008 C5A CO BSE A/S on the washer face and the threads of the mounting studs for the turbocharger before assembly. Tighten the nuts that hold the turbocharger to the exhaust manifold to the following torque. ...
55 ± 5 N·m (41 ± 4 lb ft)
(3) Studs
- Tighten the four exhaust manifold studs to the following torque. ...
35 ± 5 N·m (26 ± 4 lb ft)
Caterpillar Information System:
C7 Industrial Engines Turbocharger
2009/06/08 The Packaging Consist of the C9 Genset Has Been Changed {1000, 1021, 7002}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
2009/06/22 Fuel Injection Pump Latch Valve {1251}
C7 Engines for Combat and Tactical Vehicles Safety Messages
G3304B and G3306B Engines Exhaust Manifold - Remove
C32 Petroleum Engines Monitoring System
C9 Engine Monitoring System
C13 Engine for Caterpillar Built Machines Accessory Drive - Remove and Install - Brackets and Pulleys
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
G3304B and G3306B Engines Spark Plugs - Remove and Install
G3304B and G3306B Engines Exhaust Manifold - Install
C7.1 Industrial Engine Diesel Particulate Filter - Clean
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Tier 4 Final Engines Water Lines
3512B and 3516B Engines Exhaust Manifold
C32 Petroleum Engines General Hazard Information
3000 Frame SR5 Electric Power Generation Coupling - Remove
C9.3 Industrial Engine Turbocharger
3000 Frame SR5 Electric Power Generation Coupling - Install
3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install
C9 Marine Engines Diagnostic Flash Code Retrieval
C9 Marine Engines Configuration Parameters