Turbocharger
Show/hide table
Illustration 1 | g01925814 |
(1) Torque for the clamp assembly ...
(2) Use the following procedure to tighten the clamp assembly:
- Tighten the clamp assembly to
18.1 N·m (160.2 lb in) . - Loosen the clamp assembly to
5.6 N·m (50.0 lb in) . - Again, tighten the clamp assembly to
13.5 ± 1.0 N·m (119.5 ± 8.9 lb in) .
(3) Opening pressure of the wastegate at
Show/hide table
Illustration 2 | g01925835 |
Front view of engine |
Note: Before assembly, apply 4C-5599 Anti-Seize Compound to the threads of the locknuts.
(4) Torque for four locknuts ...
Caterpillar Information System:
2009/06/08 The Packaging Consist of the C9 Genset Has Been Changed {1000, 1021, 7002}
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
2009/06/22 Fuel Injection Pump Latch Valve {1251}
C7 Engines for Combat and Tactical Vehicles Safety Messages
G3304B and G3306B Engines Exhaust Manifold - Remove
C32 Petroleum Engines Monitoring System
C9 Engine Monitoring System
C13 Engine for Caterpillar Built Machines Accessory Drive - Remove and Install - Brackets and Pulleys
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
G3304B and G3306B Engines Spark Plugs - Remove and Install
C7 Petroleum Engine Plate Locations and Film Locations
C13 Engine for Combat and Tactical Vehicles Turbocharger
G3304B and G3306B Engines Exhaust Manifold - Install
C7.1 Industrial Engine Diesel Particulate Filter - Clean
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Tier 4 Final Engines Water Lines
3512B and 3516B Engines Exhaust Manifold
C32 Petroleum Engines General Hazard Information
3000 Frame SR5 Electric Power Generation Coupling - Remove
C9.3 Industrial Engine Turbocharger
3000 Frame SR5 Electric Power Generation Coupling - Install
3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install
C9 Marine Engines Diagnostic Flash Code Retrieval