Fuel Injector Mechanism
Show/hide table
| |
| 图 1 | g03836106 |
Show/hide table
| 技术规格 - 224-9869 气门机构总成和 357-9219 气门机构总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 317-1121 安全螺母 | 拧紧至扭矩为 |
| 2 | 1 | 6J-2245 O 形密封圈 | 用清洁的发动机机油轻轻地润滑孔。 |
| 3 | 1 | 7E-6508 盖组件 | 用手开始拧紧盖组件的固定螺母，使接线柱不至出现螺纹交错。
拧紧盖组件的固定螺母至 |
| 4 | 1 | 100-3878 喷油器弹簧 | 测试力下的长度为 测试力为 测试后的自由长度为 |
| 5 | 2 | 334-1626 螺栓 | 如果初次安装后拆下螺栓，则在螺栓螺纹上涂抹 Loctite 衬垫制作胶 #2。 |
| B | 1 | 230-2620 衬套 | 组装后摇臂轴的衬套孔径为 安装深度为 |
| C | 1 | 234-2273 摇臂轴 | 直径为 |
| D | 1 | 282-7944 喷油器挺杆组件 | 直径为 缸盖上的单体喷油器挺柱组件孔径为 |
Caterpillar Information System:
2009/06/22 Fuel Injection Pump Latch Valve {1251}
C7 Engines for Combat and Tactical Vehicles Safety Messages
G3304B and G3306B Engines Exhaust Manifold - Remove
C32 Petroleum Engines Monitoring System
C9 Engine Monitoring System
C13 Engine for Caterpillar Built Machines Accessory Drive - Remove and Install - Brackets and Pulleys
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
G3304B and G3306B Engines Spark Plugs - Remove and Install
C7 Petroleum Engine Plate Locations and Film Locations
G3304B and G3306B Engines Carburetor - Install
C32 Petroleum Engines Installation Environment
C7 Petroleum Engine Installation Environment
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
2009/06/08 The Packaging Consist of the C9 Genset Has Been Changed {1000, 1021, 7002}
C7 Industrial Engines Turbocharger
C13 Engine for Combat and Tactical Vehicles Turbocharger
G3304B and G3306B Engines Exhaust Manifold - Install
C7.1 Industrial Engine Diesel Particulate Filter - Clean
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Tier 4 Final Engines Water Lines
3512B and 3516B Engines Exhaust Manifold
C32 Petroleum Engines General Hazard Information
3000 Frame SR5 Electric Power Generation Coupling - Remove
C9.3 Industrial Engine Turbocharger