Fan - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 140-7742 | 套筒 | 1 |
开始:
- 拆下风扇护罩。 请参阅拆解和组装, "风扇护罩 - 拆卸和安装"。
- 将工具 (A) 和适当的起吊设备连接到风扇 (1) 上。 风扇 (1) 的重量约为 45 kg (100 lb)。
Show/hide table
 | |
| 图 1 | g01289730 |
- 拆下螺栓 (2 ) 。 拆下风扇 (1) 。
Show/hide table
 | |
| 图 2 | g01289733 |
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 140-7742 | 套筒 | 1 |
- 将工具 (A) 和适当的起吊设备连接到风扇 (1) 上。 风扇 (1) 的重量约为 45 kg (100 lb)。 安装风扇 (1) 。 安装螺栓 (2) 。
Show/hide table
| | |
| 图 3 | g01289733 |
- 从风扇 (1) 上拆下工具 (A) 和适当的起吊设备。
Show/hide table
| | |
| 图 4 | g01289730 |
End By: 安装风扇护罩。 请参阅 拆解和组装, "风扇护罩 - 拆卸和安装"。
Caterpillar Information System:
C27 and C32 Generator Set Engines Belt Guard - Remove and Install
C32 Power Module Heat Shield - Inspect/Replace
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Remove
C27 and C32 Generator Set Engines Fan Drive - Remove and Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Modulating Valve (Transmission Clutch) - Remove and Install
C11 and C13 Engines Valve Mechanism Cover - Remove and Install
2006/07/01 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Transfer Gears - Install - Idler
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Transfer Gears - Remove - Idler
C15 On-Highway Engine Valve Mechanism Cover - Remove and Install
3500B Generator Sets Emergency Stopping
C27 and C32 Generator Set Engines Fan Guard - Remove and Install
C15 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
C32 Power Module Air Inlet Filter - Check
3612 and 3616 Engines Fuel Priming Pump - Remove
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Disassemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Assemble
3612 and 3616 Engines Fuel Priming Pump - Install
Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908} Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control (Shift Solenoid) - Calibrate
2006/08/01 New Oil Pan is Now Available {1302}
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}