2005/03/21 Caterpillar


Use 129-3252 Friction Pack Compressor Assembly And FT-3263 Cap To Measure Shim Thickness And Assemble Differential Clutch Packs {3263}

Usage:

IT14G 1WN
Integrated Toolcarrier:
IT14G (S/N: 8ZM1-UP; 1WN1-UP)
Wheel Loader:
914G (S/N: 7ZM1-UP; 9WM1-UP)
Service Magazine, SEPD0406, 02 03 1998, "Use 129-3252 Friction Pack Compressor Assembly And Ft-3263 Cap To Measure Shim Thickness And Assemble Differential Clutch Packs". This information is no longer current. Replace the article with the following information.Testing and Adjusting, RENR6491, "IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train", "Limited Slip Differential Disc End Play - Check"Disassembly and Assembly, SENR6768, "IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train ", "Limited Slip Differential - Assemble"

When you are checking the end play for the limited slip differential, refer to Testing and Adjusting, RENR6491, "Limited Slip Differential Disc End Play - Check". When you are rebuilding the limited slip differential, refer to Disassembly and Assembly, SENR6768, "Limited Slip Differential - Assemble".

Caterpillar Information System:

C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Voltage Regulators
2005/03/21 Corrections to Specifications "Cylinder Head Valves" {1100}
2005/03/21 Correction to Specifications "Cylinder Head Valves" {1108}
2005/03/21 A Clamp has been Added to the Right Side of the Pneumatic Compactors Engine Compartment {4304, 5057}
2005/03/28 New Software is Used {7620}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Operator Controls
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication System
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Drive Shaft - Remove and Install - Two-Wheel Drive
RM-300 Soil Stabilizer Battery or Battery Cable - Inspect/Replace
2005/03/21 A New Adjustment Procedure for the Bearing Cover is Now Available for the Asphalt Paver {6631}
3126B Industrial Engines E017 High Engine Coolant Temperature Warning
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Remove - In Machine
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Install - In Machine
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 04 Boost Pressure Sensor short to ground
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication Pump
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System System Pressure - Release
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System Troubleshooting
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Adjust
730 EJECTOR Articulated Truck Machine Systems Parking Brake System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.