2005/03/28 Caterpillar


New Software is Used {7620}

Usage:

12H 125
Motor Grader:
12H (S/N: CBK1-UP; AMZ1-UP; 1251-UP)

Description of Change: An open circuit in the relay for the fuel transfer pump will cause the following diagnostic code: MID 036 CID 1627 FMI 05 "Fuel Pump Relay open circuit". It is possible for an open circuit in the throttle lock lamp to generate the same fault code.

New software assigns the correct diagnostic code for the throttle lock lamp: MID 036 CID 0548 FMI 05 "Throttle Lock Lamp open circuit". Install the new software into the engine ECM.

Adaptable To: The 240-3353 Engine Ratings Electronic Software is cancelled and replaced by the 252-4874 Engine Ratings Electronic Software. The software is adaptable to the Machines that are listed above. Serial number effectivity is listed in Table 1.

Table 1
Serial Number Effectivity    
Sales Model     Serial Number    
12H     (S/N: 12500183-UP)    
12H     (S/N: AMZ00656-UP)    
12H     (S/N: CBK00771-UP)    

Caterpillar Information System:

414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Operator Controls
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication System
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Drive Shaft - Remove and Install - Two-Wheel Drive
RM-300 Soil Stabilizer Battery or Battery Cable - Inspect/Replace
2005/03/21 A New Adjustment Procedure for the Bearing Cover is Now Available for the Asphalt Paver {6631}
784C and 785C Off-Highway Truck/Tractors Seat Suspension - Inspect/Lubricate
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
RM-300 Soil Stabilizer Battery - Clean
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
2005/03/21 A Clamp has been Added to the Right Side of the Pneumatic Compactors Engine Compartment {4304, 5057}
2005/03/21 Correction to Specifications "Cylinder Head Valves" {1108}
2005/03/21 Corrections to Specifications "Cylinder Head Valves" {1100}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Voltage Regulators
2005/03/21 Use 129-3252 Friction Pack Compressor Assembly And FT-3263 Cap To Measure Shim Thickness And Assemble Differential Clutch Packs {3263}
3126B Industrial Engines E017 High Engine Coolant Temperature Warning
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Remove - In Machine
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Install - In Machine
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 04 Boost Pressure Sensor short to ground
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication Pump
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System System Pressure - Release
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.