Front Axle - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-7505     | 液压千斤顶     | 1     |
开始:
- 拆下前轮胎。 请参阅拆解和组装, "轮胎和轮缘(前)- 拆卸和安装"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 断开软管组件 (1) 和 (2) 。
Show/hide table
图 1 | g01153676 |
- 将工具 (A) 定位到前桥 (5) 下面。 前桥 (5) 的重量约为 500 kg (1100 lb)。
Show/hide table
图 2 | g01153316 |
- 拆下螺栓 (3) 和销 (4) 。 拆下前桥 (5) 。
Caterpillar Information System:
TK711, TK721, TK722 and TK732 Track Feller Bunchers Operator Controls
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication System
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Drive Shaft - Remove and Install - Two-Wheel Drive
RM-300 Soil Stabilizer Battery or Battery Cable - Inspect/Replace
2005/03/21 A New Adjustment Procedure for the Bearing Cover is Now Available for the Asphalt Paver {6631}
784C and 785C Off-Highway Truck/Tractors Seat Suspension - Inspect/Lubricate
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
RM-300 Soil Stabilizer Battery - Clean
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tire and Rim (Rear) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Trunnion Support (Oscillating Axle, Front) - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Front Axle - Install
2005/03/28 New Software is Used {7620}
2005/03/21 A Clamp has been Added to the Right Side of the Pneumatic Compactors Engine Compartment {4304, 5057}
2005/03/21 Correction to Specifications "Cylinder Head Valves" {1108}
2005/03/21 Corrections to Specifications "Cylinder Head Valves" {1100}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Voltage Regulators
2005/03/21 Use 129-3252 Friction Pack Compressor Assembly And FT-3263 Cap To Measure Shim Thickness And Assemble Differential Clutch Packs {3263}
3126B Industrial Engines E017 High Engine Coolant Temperature Warning
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Remove - In Machine
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Install - In Machine
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 04 Boost Pressure Sensor short to ground