- Paving Compactor:
- PS-150C (S/N: FPS1-277)
The 249-1791 Hose As is coming into contact with the underside of 240-0520 Engine Support. The point of contact is on the right side of the engine compartment. There are two options for repairing the hose clearance. The first option is identical to the factory specification and the second option is more easily performed.
The table below lists the parts that are factory installed. Installation of option 1 may be difficult because the engine restricts access. Installation of the weld plate (1) is difficult due to the restricted area.
| Required Parts for Option 1 | |||
|---|---|---|---|
| Item Number | Part Number | Description | Qty |
| 1 | 7V-5627 | Plate As | 1 |
| 2 | 4M-5282 | Bolt | 2 |
| 7R-7908 | Clamp | 2 | |
| 7V-5628 | Plate | 1 | |
| 3 | 177-2215 | Strap | 1 |
 | |
| Illustration 1 | g01153556 |
(1) 7V-5627 Plate Assembly (2) 7R-7908 Clamp Assembly (3) The 177-2215 Strap is located underneath the hydraulic tank. | |
 | |
| Illustration 2 | g01153602 |
(1) 7V-5627 Plate As (4) 140 mm (5.5 inch) (5) 150 mm (5.9 inch) | |
The table below lists the parts for a basic repair. Installation of option 2 is less restrictive. Use the existing bolt to secure 1S-0094 Clip. The clip must be twisted in order to prevent the hose from contacting the engine support.
| Required Parts for Option 2 | |||
| Item | Part Number | Description | Qty |
| 6 | 1S-0994 | Clip | 1 |
| 3 | 177-2215 | Strap | 1 |
 | |
| Illustration 3 | g01153558 |
(3) Install the 177-2215 Strap on the 249-1791 Hose As so that there is no contact with the engine mount. (6) Placement of the 1S-0094 Clip (7) Contact Point | |