Engine Monitoring System
提供了一个全面的、可编程的发动机监测系统。 电子控制模块(ECM)可监测参数。 如果指定的操作参数超出了可接受范围,ECM 会有所动作。 ECM 可用的可能动作有三种:"警告", "减额" 和 "停机"。 但是,对于某些参数并不是所有动作都可用。
Caterpillar Electronic Technician(ET)可用于 ECM 选择所需动作。 可以使用 Cat ET 对监控等级和每个动作的延迟时间进行编程。
有关详细的编程说明,请参阅故障诊断和排除。
发动机仪表板通常安装在发动机上。 发动机仪表板与发动机的安装距离最远可为
- 紧急停机按钮
- 发动机控制开关 (ECS)
- 当地转速控制(如有配备)
- 报警喇叭
- ECM 就绪指示灯
- ECM 启用指示灯
- 紧急停机指示灯
- 发动机超速指示器
- 高温计(如有配备)
- 船机动力显示器(MPD)
Show/hide table
图 1 | g01054916 |
发动机仪表板(典型示例) (1) 船机动力显示器 (2) 指示灯 (3) 报警喇叭 (4) 紧急停机按钮 (5) 发动机控制开关 |
下列控制面板开关位于发动机仪表板内:
- 盘机超越开关
- 预润滑超越开关
- 超越保护开关
- 扭矩限制开关
- 油门控制开关
- 低怠速开关
盘机超越开关允许操作员用发动机起动器盘机起动发动机。 这一操作超越了任何控制或任何发动机保护系统。
预润滑超越开关允许操作员在发动机起动期间开始盘机循环时,超越预润滑泵进程。
超越保护开关向用户提供超越发动机保护设备的输入。
扭矩限制开关启用扭矩限制功能。
油门控制开关允许通过面板上的电位计控制发动机转速(如有配备)。
低怠速开关提供控制发动机转速的能力。 启用该开关时,发动机将按编程设定的低怠速转速运转。
请参考图 2 和图 3。
Show/hide table
图 2 | g01055283 |
船用推进发动机 (6) 盘机超越开关 (7) 预润滑超越开关 (8) 超越保护开关 (9) 扭矩限制开关 (10) 当地油门开关 |
Show/hide table
图 3 | g01055248 |
船用附件 (11) 盘机超越开关 (12) 预润滑超越开关 (13) 超越保护开关 (14) 低怠速开关 |
Caterpillar Information System:
3408C and 3412C Marine Engines Gear Group (Front)
G3408C and G3412C Engines Refill Capacities and Recommendations
3412E Petroleum Engine Reference Material
3500B and 3500C Marine Engines Electronic Control Module (ECM)
C-10 Petroleum Engine Electrical System
C11 and C13 Petroleum Engines Cooling System Coolant (ELC) - Change
2004/04/01 The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
C32 Power Module Cooling System Coolant (DEAC) - Change
3412E Petroleum Engine Refill Capacities and Recommendations
3412E Petroleum Engine Diagnostic Flash Code Retrieval
C11 and C13 Petroleum Engines Product Lifting
3412E Petroleum Engine Plate Locations and Film Locations
C-10 Petroleum Engine Electronic Unit Injector - Test
C-15 Petroleum Engine Inlet Manifold Pressure - Test
C13, C15, and C18 Generator Set Engines CAN Data Link Circuit - Test
C-15 Petroleum Engine Cooling System - Test
2004/04/01 The Procedure for the Installation of the Electronic Unit Injector has Changed {1290}
2004/03/29 New Pry Bars Have Striking Caps on Handles {0607}
C13, C15, and C18 Generator Set Engines Cat Data Link Circuit - Test
2004/04/01 The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
2004/04/01 Twist Impact Sockets Grip Fasteners as Torque is Applied {0601}
C13, C15, and C18 Generator Set Engines Electrical Power Supply Circuit - Test
C-10 Petroleum Engine Safety Messages
3412 Generator Set Engines Connecting Rod