Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the pictures are not visible. When the safety messages are cleaned, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.
Replace any damaged safety messages or missing safety messages. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Any Caterpillar dealer can provide new safety messages. Safety messages can also be ordered from the Parts Manual for this engine.
Do not work on the engine and do not operate the engine unless the instructions and warnings in the Operation and Maintenance Manual are understood. Proper care is your responsibility. Failure to follow the instructions or failure to heed the warnings could result in injury or in death.
 |
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility. |
 |
The warning labels that may be found on the engine are illustrated and described.
Universal Warning
 | |
| Illustration 1 | g00547460 |
The universal warning label is located on the valve cover base.
 |
| g00934493 |
|
Electrical shock hazard. The electronic unit injector system uses 90-120 volts. |
|