MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
产生此代码的情况:
电子控制模块（ECM）已通电三秒钟。 当前没有诊断代码 262-03 和 262-04。 传感器频率高于 1000 赫兹或低于 150 赫兹。 占空比大于 95% 或小于 5%。
系统响应:
记录该代码。 在卡特彼勒电子技师（ET）的状态屏幕上，该参数会显示为无效数据。
测试步骤 1.
结果:
- 正常 - 停止
- 已修复，正常。 - 停止
Caterpillar Information System:
3412C Engine Water Temperature Regulator - Test
3306C Engines for Caterpillar Built Machines Charging System - Test
3512B Engine for SPF343, SPS343, and SPT343 Pumpers MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
3126B Engines Pinion Clearance - Adjust
3512B Petroleum Engines with the ADEM 2 Electronic Control Module MID 036 - CID 0342 - FMI 07 Secondary Speed Sensor misinstalled
3512B Petroleum Engines with the ADEM 2 Electronic Control Module MID 036 - CID 0190 - FMI 07 Primary Speed Sensor misinstalled
3408E and 3412E Engines for Caterpillar Built Machines Cooling System - Test
325D and 329D Excavators Hydraulic System Check Valve (Load)
3126B Engines Piston Ring Groove - Inspect
320D Excavator Cab Visor - If Equipped
325D and 329D Excavators Roof Hatch
2000/03/13 Use 152-1057 Fuel Injector Installer For Engine Bore Insertion {0706, 1290}
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover
3412C Engine Piston Ring Groove - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Event Codes
3126B Engines Electric Starting System - Test
3306C Engines for Caterpillar Built Machines Battery - Test
3512 and 3516 EUI Engines for Caterpillar Built Machines General Information (Air/Electric Starting System)
325D and 329D Excavators Hydraulic System Accumulator (Pilot)
3412C Engine Vibration Damper - Check
2000/03/06 Service Charts and Decals Available {0374, 0375, 7405, 7557}
3612 and 3616 Engines Fuel Injection Control Linkage
3408C, 3412C and 3412D High Performance Marine Engines Pinion Clearance - Adjust
3612 and 3616 Engines Fuel Injector