Engine Oil Pressure Sensor - Remove and Install
Show/hide table
| 注意 |
|---|
|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 切割扎带 (2) 并断开发动机油压力传感器接头 (1)。
- 拆下发动机机油压力传感器 (3)。
Show/hide table
| |
| 图 1 | g00518479 |
- 安装发动机机油压力传感器 (3)。
- 连接发动机油压力传感器接头 (1) 并安装新扎带 (2)。
Show/hide table
|
| |
| 图 2 | g00518479 |
Caterpillar Information System:
G3300 Engines Cooling System Coolant (DEAC) - Change
C-10 and C-12 Truck Engines Compression Brake
G3500 Engines Camshaft
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
G3300 Engines Ignition System Spark Plugs - Inspect/Replace
318B Excavator Machine System Specifications Track Roller (Single Flange)
3500 Spark Ignited Engines Engine Design
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
3406C (PEEC III) Truck Engines Glossary of Electronic Control Terms
3406E Engine Speed/Timing Sensor - Remove and Install
3176C Engine Cooling System Coolant (DEAC) - Change
3176C and 3196 Industrial Engines Speed/Timing Sensor - Remove and Install
3524B Engines for Off-Highway Trucks Fuel in Cooling System
3176C Engine Cooling System Coolant (ELC) - Change
3500B and 3500B High Displacement Generator Set Engines Oil Contains Coolant
3516B Engine for Caterpillar Built Machines Engine Has Early Wear
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
3606 and 3608 Engines Exhaust Manifold
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
3516B Engine for Caterpillar Built Machines Fuel Dilution of Engine Oil
3406E On-Highway Engine Turbocharger - Assemble
3500B and 3500B High Displacement Generator Set Engines Exhaust Temperature Is Too High
Installation And Initial Start Up Procedures For G3300 And G3400 Engines{1000} Installation And Initial Start Up Procedures For G3300 And G3400 Engines{1000}